Chapter 2 Printing Tasks

132

Loading Envelopes in Tray 1

1Open Tray 1.

2If necessary, pull out the tray extension for the envelope size you are printing.

3Place up to ten envelopes between the paper width guides, face up.

4Slide the paper width guides until they lightly touch both sides of the envelope stack without bending it.

1

2

Note

Paper heavier than 28 lb (105 g/m2) should be printed from Tray 1 to the Face-up Bin to avoid curl.

If Tray 1 is in CASSETTE mode, the printer Attention light will flash. Press - VALUE + to change the size to match the paper size in Tray 1, and press SELECT.

The fuser lever should be changed for printing envelopes (see page 128).

3

4

Printing Envelopes