HP and 8150 MFP manual Advanced Printing Tasks 183

Chapter 3 Advanced Printing Tasks 183

2Print the job. The status indicator on the HP Fast InfraRed Connect lights

up, and, after a short delay, the printer status panel displays PROCESSING JOB.

	If the status indicator does not light up, realign the HP Fast InfraRed Connect
	with the FIR port on the sending device, resend the print job, and maintain the
	alignment of all devices. If you have to move the equipment (for example, to
	add paper), make sure that all devices remain within the range of operation to
	maintain the connection.
	If the connection is interrupted before your print job is complete, the
	HP Fast InfraRed Connect status indicator turns off. You have up to
	40 seconds to correct the interruption and continue the job. If the connection is
	resumed within this time, the status indicator lights up again.
		The connection is permanently broken if the sending port is moved out of
Note
		operating range or if anything passing between the ports blocks
		transmission. (This block could be a hand, paper, or even direct sunlight.)
		Depending on the size of the job, printing with the HP Fast InfraRed
		Connect may be slower than printing with a cable connected directly to
		the parallel port.

Printing with the Optional HP Fast InfraRed Connect