HP and 8150 MFP manual Printer Hard Disk, Initialized, Not Functioning

Chapter 5 Problem Solving 296

Problems with the Optional Envelope Feeder (continued)

SituationSolution

Printer does not recognize the Optional Envelope Feeder.

!Turn the printer off, remove and re-install the Optional Envelope Feeder, then turn the printer back on.

!Make sure the Optional Envelope Feeder has been configured in the printer driver. See page 66 for more information on accessing the printer driver.

Printer Hard Disk

Situation	Solution
Printer does not	Turn the printer off and verify that the hard disk is inserted
recognize the hard disk.	correctly and is securely fastened.
Disk is not initialized.	Use the Windows-based HP LaserJet Resource Manager or
DISK x NOT	the Macintosh-based HP LaserJet Utility to initialize the disk.
INITIALIZED
Disk failure.	Turn the printer off and make sure that the EIO disk is
EIO x DISK	inserted correctly and securely fastened. If the control panel
NOT FUNCTIONING	message continues to be displayed, the disk drive needs to
	be replaced.

Correcting Output Quality Problems