HP and 8150 MFP manual Printing Tasks 143

Chapter 2 Printing Tasks 143

If the settings are not available from the software, set the custom paper size from the control panel:

1From the Printing Menu set CONFIGURE CUSTOM PAPER=YES.

2From the Printing Menu, select inches or millimeters as the unit of measurement.

3From the Printing Menu, set the X dimension (the front edge of the paper) as shown in the illustration above. X can be from 3.9 to 11.7 inches (from 98 to 297 mm) for Tray 1. Set the Y dimension (the side edge of the paper) as shown in the illustration above. Y can be from 7.5 to 17.7 inches (from 191 to 450 mm) for Tray 1.

4If custom paper is loaded into Tray 1 and TRAY 1 MODE=CASSETTE, then set TRAY 1 SIZE=CUSTOM from the Paper Handling Menu in the printer’s control panel. See Customizing Tray 1 Operation on page 154.

5In the software, select Custom or the name assigned to the custom-size paper in the driver as the paper size.

For example, if the custom paper is 8 x 10 inches (203 x 254 mm), set X=8 inches and Y=10 inches (X=203 millimeters and Y=254 millimeters).

Printing Special Paper