Chapter 5 Problem Solving

286

Problems with the Optional 5-bin Mailbox with Stapler (continued)

Situation

Solution

 

 

Printer does not

! Check the cable between the Mailbox and the stapler.

recognize stapler.

Make sure it is properly connected at both ends. See

 

page 292 for cabling configurations.

The 5-bin Mailbox with Stapler will not power on.

!Make sure that the power cord is firmly plugged into both the 5-bin Mailbox with Stapler and the power receptacle. Remove and reconnect the power cord.

!Make sure that the cable from the 5-bin Mailbox with Stapler is plugged into the printer C-link connector. If not, turn the printer off, plug the cable into the C-link connector, then turn the printer back on. See page 292 for cabling configurations.

!Verify that the cables are firmly attached to the printer.

Paper jams and paper

! Make sure that you are using the supported paper weights

feeding problems.

(page 392).

 

! Do not pull paper out of the bins while printing.

 

! Check cables and connectors between the printer and the

 

5-bin Mailbox with Stapler. See page 292 for cabling

 

configurations.

Correcting Output Quality Problems