HP and 8150 MFP manual Situation Solution

Chapter 5 Problem Solving 283

Problems with the Optional 2000-sheet Input Tray (Tray 4) (continued)

Situation	Solution
Tray 4 will not power on.	! The power cord is not firmly plugged into both the printer
	and the power receptacle. Remove and reconnect the
	power cord.
	! Check cables and connectors between the tray and the
	printer. See page 292 for cabling configurations.
Cannot access Tray 4.	Make sure that the paper tray guides are adjusted correctly
	for the paper size you are using (page 98).
Printer does not	! Make sure the Optional 2000-sheet Input Tray has been
recognize Tray 4.	configured in the printer driver. See page 62 for more
	information on accessing the printer driver.
	! Turn the printer off and then back on.
	! Make sure that the C-link cable from the Tray 4 base is
	plugged into the printer. If not, turn the printer off and plug
	the cable into the printer, then turn the printer back on.
	See page 292 for cabling configurations.
	! Make sure the power cord is plugged into Tray 4. See
	page 292 for cabling configurations.
	! If the printer still does not recognize Tray 4, contact your
	dealer or authorized HP service provider.

Correcting Output Quality Problems