HP and 8150 MFP manual Chapter Problem Solving 228 Printer Messages

Chapter 5	Problem Solving	228
Printer Messages (continued)
Message	Explanation or Recommended Action

BAD DUPLEXER The duplexer is not connected properly.

CONNECTION

Turn the printer off. Re-install the duplexer. Turn the printer back on.

CHECK FINISHER DEVICE

alternates with

CLEAR JAM

The finishing device, such as a stapler, has a jam. Remove jammed paper from the specified location. Open and close the top cover to clear the message.

Make sure that the finishing device is properly connected.

If the message persists, see the user guide that came with the device.

CHECK FINISHER	The finisher cannot bind the paper correctly. The paper feeding into
DEVICE	the device is mis-aligned.
alternates with	Remove any jammed paper. Align the paper properly and reprint
FINISHER ALIGN
	the job if necessary.
ERROR
	If the message persists, see the user guide that came with the
	device.

Understanding Printer Messages