HP and 8150 MFP manual Solving Repeated Paper Jams, Problem Solving 224, Situation Solution

Chapter 5 Problem Solving 224

Solving Repeated Paper Jams

Situation	Solution
General	1. Check to see that paper is correctly loaded in the trays and that all
repeated	width guides are correctly set (not skewed). See Chapter 2, “Printing
paper jam	Tasks.”
problems
	2. Make sure that the paper tray is set for the size of paper installed
	and that the tray is not overloaded with paper.
	3. Try turning over the stack of paper in the tray. If you are using
	prepunched or letterhead paper, try printing from Tray 1.
	4. Do not use previously printed paper or torn, worn, or irregular paper.
	For recommended paper and other paper for your printer, see
	page 390.
	5. Check the paper specifications (page 390). (If paper is outside of
	the recommended specifications, problems may occur.)

Continued on next page.

Clearing Paper Jams