HP and 8150 MFP manual Clearing the Left Door Fuser Area, Problem Solving 218

Chapter 5 Problem Solving 218

Clearing the Left Door (Fuser Area)

1 Open the left door. (If an optional output device is installed, first push it away from the printer to access the left door.)

WARNING! Avoid touching the adjacent fusing area. It may be HOT.

2Remove any jammed or damaged paper from this area by pulling it out of the printer (A).

3Press down on the green tabs (B) and carefully check for paper. Be sure to remove all pieces of torn paper.

4Close the left door. If an optional output device is installed, push it back into place.

B

A

Clearing Paper Jams