HP and 8150 MFP manual HP JetDirect 610N 10/100Base-TX Print Server, Problem Solving 310

Chapter 5 Problem Solving 310

Communicating with an Optional HP JetDirect EIO Print Server

If the printer contains an optional HP JetDirect internal print server, and you cannot communicate with the printer over the network, verify operation of the print server. Check the JetDirect Configuration Page for the message I/O CARD READY. (Follow the steps on page 314 to print a configuration page.) For troubleshooting information, see the HP JetDirect administrator’s guide.

HP JetDirect 610N 10/100Base-TX Print Server

If the printer contains an optional HP JetDirect 10/100Base-TX print server, check to see that the print server was able to link to the network.

!Check the link-speed LEDs (10 or 100) on the print server. If both are off, the card failed to link to the network.

Continued on next page.

Correcting Output Quality Problems