HP and 8150 MFP manual Chapter Problem Solving 252 Printer Messages

Chapter 5	Problem Solving	252
Printer Messages (continued)
Message	Explanation or Recommended Action

68 NVRAM ERROR An error occurred in the printer’s nonvolatile memory (NVRAM) and

CHECK SETTINGS one or more printer settings has been reset to its factory default.

Print a configuration page and check the printer settings to determine which values have changed (page 314).

If this message persists, contact an HP-authorized service or support provider. (See the HP Customer Care pages at the front of this user guide.)

68 NVRAM FULL The printer’s nonvolatile memory (NVRAM) is full. Some settings

CHECK SETTINGS might have been reset to the factory defaults.

Print a configuration page and check the printer settings to determine which values have changed (page 314).

Hold down CANCEL JOB while turning the printer on. This will clean up the NVRAM by removing old areas that are not being used.

If this message persists, contact an HP-authorized service or support provider. (See the HP Customer Care pages at the front of this user guide.)

Understanding Printer Messages