Casablanca Fan Company 55058, 55061 operation manual Tools Needed

Page 3

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers

Wire Strippers

Screwdrivers

Power Drill (optional)

9/64” Drill Bit

(optional)

If mounting to a support structure, you will also need these tools.

3

M6021-01 • 04/16/15 • © 2013–2015 Casablanca Fan Company

Image 3

Contents

Table of Contents What to Expect with Your Installation Tools Needed Angled Standard Support Mounting StructureCeiling Outlet BoxFor angled ceilings, point Opening toward peak Ceiling BracketPreparation Downrod Steps 1-5 to remove standard downrod pipeSteps 6-10 to reassemble with new pipe Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrodDo not Pick the FAN UP by Put the wires and downrod through the canopyAssembly as shown WiringOM F Using the orange wire connectors from the hardware bagWall Control BeforeAfter Holes CanopyBlades Switch Housing Socket Shade Socket Ring Socket Ring Tool Light KitTo the short chain coming from Hardware bag With bulbs of the same wattage Switch housingOperation Battery Holder DoorLights Down Battery HolderFan SpeedMaintenance & Cleaning Light PullChain Fan doesn’t work TroubleshootingUnpairing Procedure for Faulty Operation of Remote Controls