Casablanca Fan Company 55010 Coming from the switch housing, Colored markings on the connectors

Page 15

Switch Housing (continued)

www.CasablancaFanCo.com

1.888.227.2178

Connect the plugs from the upper and lower

Lift the lower switch housing up until the

Connect the fandangle to the short chain

switch housings. Make sure to line up the

holes line up with the screw holes in the

coming from the switch housing.

colored markings on the connectors.

upper switch housing. Install the three (3)

 

 

switch housing screws, found in

 

 

the

hardware bag.

 

Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all 3 assembly screws could result in the switch housing fixture falling.

15

M6007-01 • 06/14/12 • © Casablanca Fan Company

Image 15
Contents Table of Contents What to Expect with Your Installation Screwdrivers 11/32 Wrench Power Drill Drill Bit Optional Tools NeededLadder Pliers Mounting Options Standard Ceiling Mounting Outlet Box Style RequiredFan from a vaulted or angled ceiling See previous Ceiling Bracket Installation Mounting IsolatorRemove all four 4 mounting Isolators For angled ceilings, point Opening toward peak Remove the shipping blocks from Ceiling Bracket Installation PreparationDownrod Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrodFan Put the wires and downrod throughUsing an orange wire Connector from Hardware bag WiringHoles CanopyBlades sold separately BladesWhich two screw holes you choose Twist counterclockwise Switch HousingColored markings on the connectors Coming from the switch housingTo switch the direction of air flow Maintenance & CleaningFan doesn’t work Troubleshooting