Casablanca Fan Company 55011, 55010, 55012 operation manual Blades sold separately

Page 13

Blades

Blades sold separately

www.CasablancaFanCo.com

Remember the screws that you kept after removing the shipping blocks (page 7)? You

need them plus fivemore from

hardware bag forthis step.

1.888.227.2178


Insert grommets found in the		hardware
bag into the holes in the blades, then
secure each blade to a blade iron with
screws found in the	hardware bag.

Lightly attach the blade irons to the

motor with screws found in

the hardware bag, then securely tighten after both screws are attached.

Suitable for use in wet locatons when installed in a GFCI portected branch circuit. If unsure, contact an electrician.

13

M6007-01 • 06/14/12 • © Casablanca Fan Company

Image 13

Contents Table of Contents What to Expect with Your Installation Tools Needed Screwdrivers 11/32 Wrench Power Drill Drill Bit OptionalLadder Pliers Standard Ceiling Mounting Outlet Box Style Required Mounting OptionsFan from a vaulted or angled ceiling See previous Mounting Isolator Ceiling Bracket InstallationRemove all four 4 mounting Isolators For angled ceilings, point Opening toward peak Remove the shipping blocks from Ceiling Bracket Installation PreparationDownrod Tighten the setscrew Remove the pre-installed Hand tighten the downrod atSetscrew so that the downrod Leave at least 8 extendingFan Put the wires and downrod throughUsing an orange wire Connector from Hardware bag WiringHoles CanopyBlades sold separately BladesWhich two screw holes you choose Twist counterclockwise Switch HousingColored markings on the connectors Coming from the switch housingTo switch the direction of air flow Maintenance & CleaningFan doesn’t work Troubleshooting