Casablanca Fan Company 55010, 55011, 55012 operation manual Canopy, Holes

Page 12

Canopy

www.CasablancaFanCo.com

1.888.227.2178

Position the canopy so that, when lifted into place, the canopy fits into the hanging bracket as shown.

Screw

Holes

Lift the canopy into place so that

the screw holes are aligned.

Insert the two canopy screws

found in the

hardware bag.

12

Note: Fan style may vary.

M6007-01 • 06/14/12 • © Casablanca Fan Company

Image 12

Contents Table of Contents What to Expect with Your Installation Screwdrivers 11/32 Wrench Power Drill Drill Bit Optional Tools NeededLadder Pliers Mounting Options Standard Ceiling Mounting Outlet Box Style RequiredFan from a vaulted or angled ceiling See previous Ceiling Bracket Installation Mounting IsolatorRemove all four 4 mounting Isolators For angled ceilings, point Opening toward peak Ceiling Bracket Installation Preparation Remove the shipping blocks fromDownrod Remove the pre-installed Hand tighten the downrod at Tighten the setscrewSetscrew so that the downrod Leave at least 8 extendingPut the wires and downrod through FanWiring Using an orange wire Connector from Hardware bagCanopy HolesBlades Blades sold separatelySwitch Housing Which two screw holes you choose Twist counterclockwiseComing from the switch housing Colored markings on the connectorsMaintenance & Cleaning To switch the direction of air flowTroubleshooting Fan doesn’t work