COMFORT•TOUCH ♦ REVERSE FEATURE
Pressing the REVERSE button will change the direction of rotation. An audio tone signals the beginning of the reverse sequence and you will see the airflow direction arrow changing. The fan gradually slows to a stop, then reverses direction.
Note: This function does not operate if the fan is not running.
REVERSE
COMFORT•TOUCH ♦AUTO-SPEED FEATURE
In the Auto Speed mode, fan speed changes in response to changes in room tempera- ture. Push the AUTO button to start. The words 'AUTO SPEED' show on the display. Set the fan speed to the speed at which you are most comfortable. Once set, the fan will increase or decrease by one speed for each 1.5° F increase or decrease in temperature. If temperature decreases enough to turn the fan OFF, the Auto Speed indicator will flash slowly to remind you that the fan will turn on when the temperature increases.
Note: The temperature displayed is from an electronic thermometer built into the remote control that reads room temperature. It is not a thermostat that controls the room temperature.
To cancel Auto Speed, simply push the AUTO button again. Selecting WINTER also cancels Auto Speed.
AUTO SPEED
Temperature Accuracy ± 3° F
COMFORT•TOUCH ♦SAVER FEATURE
The Saver mode will automatically turn lights off 1 hour after the |
|
lights are turned on. Press the SAVER button and 'SAVER' will appear in |
|
the display. An audio tone will warn you 20 seconds before the pro- |
|
gram is going to turn the lights off. Press the SAVER button again to |
|
cancel. | SAVER |
|
COMFORT•TOUCH ♦ WINTER FEATURE
The Winter mode provides |
| |
WINTER to activate, and the word 'WINTER' is indicated. This puts the |
| |
fan in the upward airflow direction at the fan's lowest speed. Every ten |
| |
minutes the fan will increase to speed 3 for ten seconds before return- |
| |
ing to the lowest speed. |
| |
Pressing any button on the remote will cancel the | WINTER | |
'Winter' mode; except using the light functions. | ||
|
COMFORT•TOUCH ♦SECURITY FEATURE
Pressing the SECURITY button will start the Security lighting pro- gram. The controller beeps and indicates 'SECURITY'. The light will automatically turn ON and OFF in a seemingly random man- ner over an eight and a quarter hour programmed cycle that is designed to give the home a
Regardless of the light setting when switching to the Security mode (lights on or off, dim or bright), the lights will increase to high brightness and then begin the Security cycle. This cycle is then repeated continuously until cancelled by pressing the
SECURITY button.
At any time during the Security mode you may adjust the fan speed, reverse the direction, operate in Auto Speed or Winter, use Saver or run the Test mode without affecting Security mode.
You may still turn the light ON and OFF (or OFF and ON) manu- ally for temporary lighting, but the light will continue to operate automatically at its programmed times.
6
5 4 3 2 1
SECURITY
|
| AUTO | SECURITY | REVERSE | ||
|
| SAVER | TEST | WINTER | ||
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
| ||
|
|
| Replace batteries when “Lo” is displayed |
| ||
|
|
|
| |||
|
|
| SECURITY: Lights ON and OFF automatically |
| ||
|
|
| REVERSE: Change airflow up or down |
| ||
|
|
| SAVER: Lights turn OFF after 1 hour |
| ||
| SECURITY |
| TEST: Tests all fan and light functions |
| ||
|
| WINTER: |
| |||
|
|
|
|
|
| |
|
|
|
|
|
| |
| SECURITY MODE CYCLE |
|
| |||
1. | On for 30 minutes (80% bright) | 5. On for 60 minutes (100% bright) | ||||
2. | Off for 30 minutes | 6. Off for 120 minutes | ||||
3. | On for 120 minutes (50% bright) | 7. On for 15 minutes (20% bright) | ||||
4. | Off for 60 minutes | 8. Off for 60 minutes | ||||
14