COMFORT•TOUCH ♦ CHANGING CHANNELS - CONTROL
Changing the control channel
1.Hold the 
button down until a tone is heard.
2.The temperature display will show the current channel number.
3.Press fan up 
or down 
buttons to change the number to a unique number from 49 to 63.
DO NOT use other channel numbers.
4.Push 
to return to normal operation.
You will need to repeat this step any time you remove the remote control batteries. Record the new channel setting in the space pro- vided on the rear label.
REMOTE
CONTROL
CHANNEL
NUMBER
Note: Always change the remote control channel first. The fan channel can only be changed by having the desired channel already set in the re- mote control.
COMFORT•TOUCH ♦CHANGING CHANNELS - FAN
1.Turn OFF power to the fan for five seconds or longer using the wall switch or circuit breaker.
2.Turn the power back ON.
WAIT 20 SECONDS.
You have 90 seconds in which to complete step 3.
3.Press and hold the 
and 
buttons together until the display shows 'cc' (for Change Channel), then release.
The control automatically changes the fan channel to the new setting.
Do not reset the channel on other fans in your home during this 110 second period.
COMFORT•TOUCH ♦DUAL REMOTE CONTROL - BASE
A second remote control can be purchased from your dealer to provide dual remote control of one fan. Because the fan could be confused by two controllers signaling different information it is necessary to set a BASE control and an AUXILIARY control.
The last control manually operated controls the fan.
Where two remote controls are used to control a single fan, they must be set so that:
•BOTH controls are set to the SAME channel.
•ONE control is made into the BASE control.
•The OTHER control is made an AUXILIARY control. (All remote controls leave the factory as a BASE).
Initial remote control settings
1.Set both the controls to operate the fan.
2.Select one of the remote controls to be the BASE unit.
BASE
DISPLAY
BASE Check
To confirm that the control is the BASE:
1.Press 
for 3 seconds until a beep is heard.
2.Confirm temperature display shows 'b'.
3.Press 
again to set.
COMFORT•TOUCH ♦DUAL REMOTE CONTROL - AUXILIARY
Change the other remote to be used in the room to AUXILIARY
1.Press 
until a beep is heard. Remote displays 'b'.
2.Press fan up 
or down 
buttons to change the display to 'A'.
3.Press 
again to set.
The fan will now respond to either of the remotes when pressed.
•Reminder! These steps will have to be repeated whenever the batteries are changed.
•When
AUXILIARY
DISPLAY
TWO CONTROLS OPERATING ONE FAN
When two controls are used for the same fan, we suggest that both controls be set for the same features
15