METROPOLITAN™ |
PREPARING TO INSTALL SWITCH HOUSING CAP
Step 10. Remove the three screws on the mounting plate.
Set aside for Step 12.
MOUNTING
PLATE
SCREWS
(3)
INSTALLING THE SWITCH HOUSING CAP
Step 11. Line up the three threaded holes in the rim of the switch housing with the three clearance holes in the mounting plate. Carefully slide the switch housing into the mount so that the threaded holes are directly behind the clear- ance holes.
Step 12. Install the three screws removed in Step 10.
Tighten securely by hand only.
PROCEED TO YOUR FAN’S CONTROL FEATURE SECTION FOR INSTALLATION/OPERATING INSTRUCTIONS:
INTELI•TOUCH = PAGE 8 | COMFORT•TOUCH = PAGE 12 |
7