Bryant 558J manual

Page 50

558J

1.Unit cabinet shall be constructed of galvanized steel, and shall be bonderized and coated with a pre-painted baked enamel finish on all externally exposed surfaces.

2.Unit cabinet exterior paint shall be: film thickness, (dry) 0.003 inches minimum, gloss (per ASTM D523,

60_F/16_C): 60, Hardness: H-2H Pencil hardness.

3.Evaporator fan compartment interior cabinet insulation shall conform to ARI Standards 210 or 360 minimum exterior sweat criteria. Interior surfaces shall be insulated with a minimum 1/2-in. thick, 1 lb density, flexible fiberglass insulation, neoprene coated on the air side. Aluminum foil-faced fiberglass insulation shall be used in the gas heat compartment.

4.Base of unit shall have a minimum of four locations for thru-the-base gas and electrical connections (factory installed or field installed), standard.

5.Base Rail

a.Unit shall have base rails on a minimum of 2 sides.

b.Holes shall be provided in the base rails for rigging shackles to facilitate maneuvering and overhead rig- ging.

c.Holes shall be provided in the base rail for moving the rooftop by fork truck.

d.Base rail shall be a minimum of 16 gauge thickness.

6.Condensate pan and connections:

a.Shall be a sloped condensate drain pan made of a non-corrosive material.

b.Shall comply with ASHRAE Standard 62.

c.Shall use a 3/4” -14 NPT drain connection, possible either through the bottom or side of the drain pan. Connection shall be made per manufacturer’s recommendations.

7.Top panel:

a.Shall be a single piece top panel.

8.N/A

9.Electrical Connections

a.All unit power wiring shall enter unit cabinet at a single, factory-prepared, knockout location.

b.Thru-the-base capability

i.Standard unit shall have a thru-the-base electrical location(s) using a raised, embossed portion of the unit basepan.

ii.Optional, factory-approved, water-tight connection method must be used for thru-the-base electrical connections.

iii.No basepan penetration, other than those authorized by the manufacturer, is permitted.

10.Component access panels (standard)

a.Cabinet panels shall be easily removable for servicing.

b.Unit shall have one factory installed, tool-less, removable, filter access panel.

c.Panels covering control box, indoor fan, indoor fan motor, gas components (where applicable), and com- pressors shall have a molded composite handles.

d.Handles shall be UV modified, composite. They shall be permanently attached, and recessed into the pan- el.

e.Screws on the vertical portion of all removable access panel shall engage into heat resistant, molded com- posite collars.

f.Collars shall be removable and easily replaceable using manufacturer recommended parts.

23 81 19.13.I. N/A

23 81 19.13.J. Coils

1.Standard Aluminum/Copper Coils:

a.Standard evaporator and condenser coils shall have aluminum lanced plate fins mechanically bonded to seamless internally grooved copper tubes with all joints brazed.

b.Evaporator and condenser coils shall be leak tested to 150 psig, pressure tested to 400 psig, and qualified to UL 1995 burst test at 2,200 psi.

2.Optional Pre-coated aluminum-fin coils:

a.Shall have a durable epoxy-phenolic coating to provide protection in mildly corrosive coastal environ- ments.

b.Coating shall be applied to the aluminum fin stock prior to the fin stamping process to create an inert barrier between the aluminum fin and copper tube.

c.Epoxy-phenolic barrier shall minimize galvanic action between dissimilar metals.

50

Image 50
Contents Product Data Table of Contents Features and Benefits Design Revision Cooling Tons Factory Installed OptionsUnit Type VoltageDampers FACTORY-INSTALLED Options and FIELD-INSTALLED AccessoriesEconomizers Economizer SensorsFactory Options AND/OR Accessories Electric Heaters Alternate Motors and DrivesThru-the-Base Connections ARI Cooling Rating Tables Minimum Minimum Maximum Airflows Electric HeatUnit Cooling Electric Heaters 125 250 500 1000 2000 4000 8000 Sound Performance TableOutdoor Sound dB Physical Data Cooling TonsElectric Heat Electrical Data Tons CRSINGLE***A00 Part Number Power 102A00 6.0 104B00 10.5 9.6 105A00 16.0 12.0/14.7 038 Curbs & Weights Dimensions Chassis Base Unit Dimensions ChassisCurb Installation Detail Typical Application Data Selection Procedure with 558J*07 Example Determine cooling and heating loadsAmbient Temperature 558J*04 105 115 EAT dB558J*05 105 115 EAT dB 558J*06 105 115 EAT dB Tons 558J*07 105 115 EAT dBStatic Pressure Adders Factory Options and/or Accessories General fan performance notesCFM RPM BHP FAN Performance558J*04 FAN Performance 558J*05 1485 1494Medium Static Option High Static Option 1512765 558J*06724 2250 980 1066 1146 1220 1291 2375 1024 558J*07 907Pulley Adjustment Unit MOTOR/DRIVE Motor Pulley Turns Open ComboECONOMIZER, Barometric Relief and PE Performance CfmElectrical Information FLA IFM MCA No P.E FLA LRA MCA/MOCP Determination no C.O. or Unpwrd C.OElectric Heater Type FLA Mocp DISC. Size558J*05 Type FLA MCA Mocp DISC. Size MCA/MOCP Determination W/ Pwrd C.OIFM No P.E FLA LRA 15.5 16.5 11.5 IFM No P.E Type FLA MCA Mocp DISC. Size LRAIFM MCA No P.E LRA PH---HZ Electric Heater Unit IFM No P.E40.0 41.3 12.9 13.9 14.4 15.6 Typical Power Diagram Typical Wiring Diagram Economizer NotesElectro-mechanical units with no economizer Sequence of OperationGeneral Electro-mechanical units with an economizerGuide Specifications 558J*04-07 Hvac Guide Specifications23 09 93.13 Insert Sequence of Operation 558J 558J 558J 558J 558J 558J Catalog No. PDS558J---01

558J specifications

The Bryant 558J is a high-efficiency air conditioning unit that provides outstanding comfort and performance for residential spaces. Engineered with contemporary technology, this HVAC system showcases a blend of innovative features designed to enhance user experience while promoting energy efficiency.

One of the main features of the Bryant 558J is its high Seasonal Energy Efficiency Ratio (SEER) rating, which ensures optimal energy savings while providing consistent cooling throughout the warmer months. This model boasts an impressive SEER that positions it among the top performers in its category, making it an excellent choice for environmentally-conscious homeowners looking to reduce their energy consumption.

The Bryant 558J utilizes advanced variable-speed compressor technology. This means it can adjust its cooling output dynamically based on indoor temperature requirements, which results in improved temperature consistency and quieter operation. Unlike single-speed systems that can be noisy during operation, the variable-speed compressor provides a more tranquil living environment, as it can run at lower speeds for extended periods.

Additionally, the unit is equipped with a durable, all-weather cabinet designed to resist corrosion and withstand the elements, ensuring longevity and reliability. The unit's aesthetic design also allows it to blend seamlessly into most outdoor settings, enhancing curb appeal without compromising functionality.

In terms of installation and maintenance, the Bryant 558J offers user-friendly features. Its compact design makes it easy to install in tight spaces, while the easy-access panel allows for straightforward maintenance and servicing, reducing downtime and improving overall efficiency.

The unit is compatible with smart thermostats, allowing homeowners to integrate modern technology into their HVAC systems. This compatibility empowers users to control their home environment remotely, monitor energy usage, and create personalized schedules that align with their lifestyles.

Furthermore, the Bryant 558J comes with a comprehensive warranty, offering peace of mind to residents investing in a cooling solution. This level of backing evidences the manufacturer's commitment to quality and customer satisfaction.

In summary, the Bryant 558J stands out as a premier air conditioning solution characterized by its high efficiency, variable-speed technology, durable construction, and modern compatibility. Whether for new installations or replacements, this model exemplifies the perfect balance of comfort, reliability, and energy savings, making it a worthwhile investment for any homeowner.