Bryant 558J manual

Page 54

558J

m.Outlet shall be accessible from outside the unit.

8.Thru-the-Base Connectors:

a.Kits shall provide connectors to permit gas and electrical connections to be brought to the unit through the unit basepan.

b.Minimum of four connection locations per unit.

9.Fan/Filter Status Switch:

a.Switch shall provide status of indoor evaporator fan (ON/OFF) or filter (CLEAN/DIRTY).

b.Status shall be displayed either over communication bus (when used with direct digital controls) or with an indicator light at the thermostat.

10.Propeller Power Exhaust:

a.Power exhaust shall be used in conjunction with an integrated economizer.

b.Independent modules for vertical or horizontal return configurations shall be available.

c.Horizontal power exhaust is shall be mounted in return ductwork.

d.Power exhaust shall be controlled by economizer controller operation. Exhaust fans shall be energized when dampers open past the 0-100% adjustable setpoint on the economizer control.

11.Ultraviolet Germicidal Lamps:

a.Ultraviolet germicidal lamps are designed to eliminate odor causing mold and fungus that may develop in the wet area of the evaporator section of the unit.

b.Shall be installed in the indoor blower section of the unit and shine on the evaporator and condensate pan.

c.Shall be specifically designed and optimized for 40_F (4_C) to 45_F (7_C), high-humidity operation in a moving air stream inside an HVAC unit.

d.The germicidal lamps shall have an output rating at 45_F (7_C) in 400 fpm airflow of 120 microwatts/cm2 at 1 meter.

12.Roof Curbs (Vertical):

a.Full perimeter roof curb with exhaust capability providing separate airstreams for energy recovery from the exhaust air without supply air contamination.

b.Formed galvanized steel with wood nailer strip and shall be capable of supporting entire unit weight.

c.Permits installation and securing of ductwork to curb prior to mounting unit on the curb.

13.Head Pressure Control Package:

a.Consists of solid-state control and condenser-coil temperature sensor to maintain condensing temperature between 90_F and 110_F (32_C and 43_C) at outdoor ambient temperatures down to -20_F (-29_C) by condenser-fan speed modulation or condenser-fan cycling and wind baffles.

14.Flue Shield:

a.Provides added safety protection from the hot sides of the gas flue hood.

15.Condenser Coil Hail Guard Assembly:

a.Hail guard shall protect against damage from hail and flying debris.

16.Unit-Mounted, Non-Fused Disconnect Switch:

a.Shall be factory-installed, internally mounted, NEC and UL approved non-fused switch shall provide unit power shutoff.

b.Shall be accessible from outside the unit and shall provide power off lockout capability. (80 amp maxim- um).

17.Convenience Outlet:

a.Shall be factory-installed and internally mounted with easily accessible 115-v female receptacle.

b.Shall include 15-amp GFI receptacle with independent fuse protection.

c.Voltage required to operate convenience outlet shall be provided by a factory-installed step-down trans- former.

d.Shall be accessible from outside the unit.

18.High-Static Indoor Fan Motor(s) and Drive(s) (004-12):

a.High-static motor(s) and drive(s) shall be factory-installed to provide additional performance range.

19.Flue Discharge Deflector:

a.Flue discharge deflector directs unit exhaust vertically instead of horizontally.

20.Condenser Coil Grille:

a.The grille protects the condenser coil from damage by large objects without increasing unit clearances.

21.Thru-the-Bottom Utility Connectors:

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Product Data Table of Contents Features and Benefits Design Revision Cooling Tons Factory Installed OptionsUnit Type VoltageDampers FACTORY-INSTALLED Options and FIELD-INSTALLED AccessoriesEconomizers Economizer SensorsFactory Options AND/OR Accessories Alternate Motors and Drives Thru-the-Base ConnectionsElectric Heaters ARI Cooling Rating Tables Minimum Maximum Airflows Electric Heat Unit Cooling Electric HeatersMinimum Sound Performance Table Outdoor Sound dB125 250 500 1000 2000 4000 8000 Physical Data Cooling TonsElectric Heat Electrical Data Tons CRSINGLE***A00 Part Number Power 102A00 6.0 104B00 10.5 9.6 105A00 16.0 12.0/14.7 038 Curbs & Weights Dimensions Chassis Base Unit Dimensions ChassisCurb Installation Detail Typical Application Data Selection Procedure with 558J*07 Example Determine cooling and heating loadsAmbient Temperature 558J*04 105 115 EAT dB558J*05 105 115 EAT dB 558J*06 105 115 EAT dB Tons 558J*07 105 115 EAT dBStatic Pressure Adders Factory Options and/or Accessories General fan performance notesFAN Performance 558J*04CFM RPM BHP FAN Performance 558J*05 1485 1494Medium Static Option High Static Option 1512558J*06 724765 2250 980 1066 1146 1220 1291 2375 1024 558J*07 907Pulley Adjustment Unit MOTOR/DRIVE Motor Pulley Turns Open ComboECONOMIZER, Barometric Relief and PE Performance CfmElectrical Information FLA IFM MCA No P.E FLA LRA MCA/MOCP Determination no C.O. or Unpwrd C.OElectric Heater Type FLA Mocp DISC. Size558J*05 MCA/MOCP Determination W/ Pwrd C.O IFM No P.E FLA LRAType FLA MCA Mocp DISC. Size 15.5 16.5 11.5 IFM No P.E Type FLA MCA Mocp DISC. Size LRAIFM MCA No P.E LRA PH---HZ Electric Heater Unit IFM No P.E40.0 41.3 12.9 13.9 14.4 15.6 Typical Power Diagram Typical Wiring Diagram Economizer NotesElectro-mechanical units with no economizer Sequence of OperationGeneral Electro-mechanical units with an economizerGuide Specifications 558J*04-07 Hvac Guide Specifications23 09 93.13 Insert Sequence of Operation 558J 558J 558J 558J 558J 558J Catalog No. PDS558J---01

558J specifications

The Bryant 558J is a high-efficiency air conditioning unit that provides outstanding comfort and performance for residential spaces. Engineered with contemporary technology, this HVAC system showcases a blend of innovative features designed to enhance user experience while promoting energy efficiency.

One of the main features of the Bryant 558J is its high Seasonal Energy Efficiency Ratio (SEER) rating, which ensures optimal energy savings while providing consistent cooling throughout the warmer months. This model boasts an impressive SEER that positions it among the top performers in its category, making it an excellent choice for environmentally-conscious homeowners looking to reduce their energy consumption.

The Bryant 558J utilizes advanced variable-speed compressor technology. This means it can adjust its cooling output dynamically based on indoor temperature requirements, which results in improved temperature consistency and quieter operation. Unlike single-speed systems that can be noisy during operation, the variable-speed compressor provides a more tranquil living environment, as it can run at lower speeds for extended periods.

Additionally, the unit is equipped with a durable, all-weather cabinet designed to resist corrosion and withstand the elements, ensuring longevity and reliability. The unit's aesthetic design also allows it to blend seamlessly into most outdoor settings, enhancing curb appeal without compromising functionality.

In terms of installation and maintenance, the Bryant 558J offers user-friendly features. Its compact design makes it easy to install in tight spaces, while the easy-access panel allows for straightforward maintenance and servicing, reducing downtime and improving overall efficiency.

The unit is compatible with smart thermostats, allowing homeowners to integrate modern technology into their HVAC systems. This compatibility empowers users to control their home environment remotely, monitor energy usage, and create personalized schedules that align with their lifestyles.

Furthermore, the Bryant 558J comes with a comprehensive warranty, offering peace of mind to residents investing in a cooling solution. This level of backing evidences the manufacturer's commitment to quality and customer satisfaction.

In summary, the Bryant 558J stands out as a premier air conditioning solution characterized by its high efficiency, variable-speed technology, durable construction, and modern compatibility. Whether for new installations or replacements, this model exemplifies the perfect balance of comfort, reliability, and energy savings, making it a worthwhile investment for any homeowner.
Top Page Image Contents