CFM UVHK36MN, UVHK29MN manual Installation and Operating Instructions for Gas Log Heaters

Page 1

Installation and Operating Instructions for

Gas Log Heaters

Models: UVHK23MP, UVHK29MN,

UVHK31MP, UVHK36MN

Models with “N” after the model number use natural gas; models with “P” after the model number use propane (LP) gas.

This appliance operates as an unvented room heat-

 

er certified under ANSI Z21.11.2b-2004 when fitted

Split Bark Logs

to a solid fuel burning masonry or factory built fire-

 

place with the flue damper closed. It also operates

 

as a decorative appliance under ANSI Z21.60b-2001.

 

CSA 2.26b-2001, when fitted to a solid fuel burning

 

masonry or factory built fireplace with the flue

 

damper open. When used as a decorative appli-

 

ance, the use of a thermostat is not allowed. State

Charred Oak Logs

or local codes may only allow operation of this ap-

 

pliance in a vented configuration. Check your state

 

or local codes.

 

WARNING

If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or loss of life.

FOR YOUR SAFETY

—Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

WHAT TO DO IF YOU SMELL GAS

•Do not try to light any appliance.

•Do not touch any electric switch; do not use any phone in your building.

•Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instruc- tions.

•If you cannot reach your gas supplier, call the fire department.

—Installation and service must be performed by a qualified installer, service agency or the gas supplier.

This is an unvented gas-fired heater. It uses air (oxygen) from the room in which it is installed. Provisions for adequate combustion and ventila- tion air must be provided. Refer to Section Provi- sions For Adequate Combustion and Ventilation Air - Page 6.

This appliance may be installed in an aftermarket, permanently located, manufactured (mobile) home, where not prohibited by local codes.

This appliance is only for use with the type of gas indicated on the rating plate. This appliance is not convertible for use with other gases.

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

20008056 1/07 Rev. 2

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Installation and Operating Instructions for Gas Log Heaters Table of Contents Important Information Important Safeguards High Elevations Installation RequirementsModel Wood Burning Fireplace Series Log Usage ChartVent Free Fireplace Series Supplying Adequate Ventilation Provisions for Adequate Combustion and Ventilation AirDetermining if You Have a Confined or Un- confined Space Converting Confined Space to Unconfined SpaceMinimum flue diameter and flue damper positions Unpacking InstallationFireplace Preparation LocationMinimum clearance to wall and ceiling No Canopy UsedTypical Gas Line Connection Gas ConnectionGas Inlet Pressure Natural Propane Gas Pressure CheckCounterclockwise ClockwiseFlame Check CleaningNatural Gas Propane Gas Split Bark Logset Positioning LogsCharred Oak Logset Position log so notch fits securely and rests on valve cover Servicing Repair PartsDescription CFM Corporation cement logs, fiber logs, or firebox liners For Majestic Fireplaces Vent-Free Gas AppliancesCFM Corporation CFM Corporation

UVHK29MN, UVHK23MP, UVHK31MP, UVHK36MN specifications

The CFM UVHK series is a line of high-performance and versatile indoor units designed for precise temperature control and energy efficiency. The UVHK36MN, UVHK31MP, UVHK23MP, and UVHK29MN models each boast unique features that make them suitable for various applications, offering both comfort and reliability.

One of the key features of the UVHK series is its advanced inverter technology. This technology allows the units to adjust their compressor speed according to the cooling or heating demand, ensuring optimal energy consumption. As a result, users can enjoy significant energy savings while maintaining comfortable indoor temperatures.

The UVHK36MN model is particularly notable for its high cooling capacity, making it ideal for larger spaces. With a cooling capacity of 36,000 BTUs, it can efficiently manage heat loads in commercial environments or spacious residential areas. It also offers a wide operating range, which means it can perform well even in extreme weather conditions.

In contrast, the UVHK31MP is tailored for medium-sized spaces, with a balanced capacity that offers both cooling and heating options. Its sleek design and quiet operation make it suitable for office installations, where creating a comfortable atmosphere is essential for productivity.

The UVHK23MP is specifically designed for smaller rooms and residential use. This model combines compact size with power, making it perfect for apartments and small houses. With its user-friendly controls and efficient performance, the UVHK23MP offers convenience without sacrificing comfort.

The UVHK29MN strikes a balance between capacity and size, catering to both residential and small commercial applications. Its dual functionality allows for both cooling and heating, making it a practical choice throughout the year.

Across the UVHK series, the units are equipped with advanced filtration systems that purify the air, ensuring a healthier indoor environment. They are also designed for low noise levels, minimizing disturbance to occupants.

In summary, the CFM UVHK36MN, UVHK31MP, UVHK23MP, and UVHK29MN models provide a robust solution for climate control needs. With their inverter technology, energy efficiency, and user-friendly features, these units are ideal for a wide range of applications, ensuring comfort and satisfaction for users.
Top Page Image Contents