User Servicing Instructions

15.Do not operate if the fan housing is removed or damaged.

16.A loose fit between the AC outlet (receptacle) and plug may cause overheating and a distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.

17.Do not operate any fan with a damaged cord or plug. Discard any damaged fan, or return the fan to the retailer where the fan was purchased, or request a return authorization to return to Kaz, Inc. for examination and/or repair.

FUSED SAFETY PLUG - FOR US MODELS ONLY

18.Do not run fan cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic areas and where it will not be tripped over.

WARNING: To Reduce The Risk of Fire or Electric Shock, Do Not Use This Fan With Any Solid State Speed Conrol Device

This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse, if needed.

1.Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord.

2.If your fan loses power and you suspect that the fuse on your fan has blown, you should first remove the spare fuse holder attached to the cord plug (Fig. 1). Remove the spare fuse from the plastic spare fuse holder, and set the spare fuse aside (Fig. 2).

3.You can gain access to the blown fuse by sliding open the door found on the side of the plug. Slide the door outward until the blown fuse is fully visible (Fig. 3).

4.Remove the blown fuse and snap the replacement fuse into place. Risk of fire. Replace fuse only with 2.5 Amp, 125 volt fuse (provided with product). Fully close the fuse door by sliding back into place. Discard the blown fuse. The plug should now be ready for normal use

5.Risk of fire. Do not replace attachment plug. Contains a safety device (fuse, AFCI, LCDI) that should not be removed. Discard product if the attachement plug is damaged.

6.If you need further information on how or when to replace the fuse in the safety plug, please contact Kaz Consumer Relations Department by visiting our website at www.kaz.com or calling 1-800-477-0457.

Fig. 1

Fig. 2

Fig. 3

HT908, HF910 specifications

Honeywell has long been a pioneer in the realm of aviation and flight technologies, and its HF910 and HT908 models exemplify the company's commitment to innovation and superior performance.

The Honeywell HF910 is a state-of-the-art flight management system designed to enhance situational awareness and efficiency in commercial and business aviation. One of its standout features is its intuitive user interface, which streamlines operations for pilots. This system provides advanced predictive capabilities, allowing users to anticipate performance changes and optimize flight paths in real-time. The HF910 boasts flexible configuration options, making it suitable for a wide range of aircraft types.

Moreover, the HF910 integrates seamlessly with various avionics components, including navigation, autopilot, and communication systems. Utilizing satellite-based technology, it enhances precision in navigation and reporting, contributing to improved safety and compliance with regulatory standards. The HF910 also supports ongoing software updates, ensuring that the system remains at the forefront of technological advancements in aviation.

Turning to the Honeywell HT908, this advanced avionics system emphasizes reliability and versatility. The HT908 offers an advanced communication platform that enhances real-time data sharing between the aircraft and ground operations. A prominent feature of the HT908 is its consolidated display technology, which provides pilots with critical flight data in an easily digestible format. This feature minimizes workload and allows pilots to focus on flying.

The HT908 is designed with redundancy and safety in mind, incorporating multiple layers of failover capabilities to ensure continuous operation during flight. This robust engineering allows it to function in diverse operational conditions, making it a trusted choice for both commercial airlines and private jet operators.

Both the HF910 and HT908 reflect Honeywell's commitment to improving the operational efficiency of modern aviation. By harnessing advanced technologies, these systems not only enhance pilot performance but also contribute to more sustainable flying practices through optimized fuel usage and reduced operational costs. As aviation continues to evolve, systems like the HF910 and HT908 will play a crucial role in shaping the future of air travel, making flying not only safer but also more efficient.