Storing | Resetting the Motor Thermostat |
Fig. 17
Fig. 18
STORE YOUR VACUUM SAFELY
1Store the dusting brush, upholstery brush, the crevice tool or the power brush on the mounts on the removable tool caddy. (fig. 17)
2Wrap the flexible hose around the base of the vacuum and hook the end of the flexible hose into the hose dock. (fig. 18) To release the hose, press the Hose Storage button.
3Wrap the attached cord strap around the power cord when storing.
4Store your vacuum cleaner with the rest of the accessories safely in a cool dry area where they will not be a hazard, will not get damaged and will not cause damage to anyone or anything.
NOTE: Empty dust cup after cleaning and prior to storing. (See “Maintenance” section for instructions.)
12 | TOLL FREE: |
NP320series_40_IB_ENG_120409_2.indd 12
Your Shark®
To reset the Motor Thermostat:
Press the Power Button to turn the vacuum off. Unplug the vacuum.
Check for clogged hose or filter; unclog hose and replace filter. Refer to Checking for Blockages.
Wait 45 minutes for vacuum to cool; then plug in the vacuum.
Press the Power Button to restart the vacuum.
Note: If vacuum still does not start, contact Customer
Service at:
Ordering Replacement Parts
To order additional parts and accessories, go to www.sharkclean.com or call
PART | PART NO. |
|
|
XFF318 | |
|
|
HEPA Filter | XHF318 |
|
|
Telescopic Tube | 1057FT |
|
|
Upholstery Brush | 1061FT |
Crevice Tool | 1062FT |
Dusting Brush | 1063FT |
Power Brush | 1064FT |
Floor Kit Handle | XKH320 |
Straight Suction Nozzle | XSN320 |