Euro-Pro NP320 manual Maintenance, Never OVER-FILL the Dust CUP, Emptying the Dust CUP

Maintenance

To reduce the risk of electric shock, unplug the unit before performing any cleaning, maintenance, or troubleshooting checks.

Reassemble all parts securely before operating vacuum.

For best results empty the Dust Cup after each use; empty several times during prolonged usage or when it reaches the MAX fill line.

NEVER OVER-FILL THE DUST CUP.

Bottom Door

Release

CAUTION: Unplug the vacuum; failure to do so might result in electric shock.

Fig. 8

Dust Cup

Release

Top Door

Release

Fig. 7

Fig. 10

Fig. 9

EMPTYING THE DUST CUP

The Dust Cup needs to be emptied each time you vacuum and periodically during cleaning, when the Dust Cup appears full.

1Press the dust cup release button and remove the dust cup from the vacuum. (fig. 7)

2Option A: for Quick Empty:

Insert the Dust Cup deep inside a trash receptacle to contain the dust and debris.

Press the bottom door release button to release the trap door. Tap gently to empty contents. (fig. 8)

Press the door shut again until it clicks.

3Option B: For Allergy Sufferers:

Wrap a trash bag around the Dust Cup leaving space at the bottom for the door to swing open. Locate the bottom door release button within the trash bag and press to release as you shake the dust cup to empty dust and debris. (fig. 9)

Press the door shut again until it clicks.

Note: Option B can also be performed outside of the home to further minimize releasing dust back into the air. Carry just the dust cup and trash bag outside.

4Check to make sure the trap door is secure before returning it to the Vacuum.

5To clean the upper compartment of the dust cup, press the top door release button to open.

(fig. 10) Empty the contents over a trash receptacle and push the door shut until it clicks into place.

www.sharkclean.com 9

NP320series_40_IB_ENG_120409_2.indd 9 12-04-09 2:08 PM