CARACTERÍSTICAS DEL VAPORIZADOR ULTRA
STEAM SHARK
USAGE SUGGESTIONS FOR ULTRA STEAM SHARK cont.
1. No más detergentes ni |
| 4. Manguera de 1,2m (4’) | |
| químicos, sólo agua. |
| reforzada, resistente a |
|
|
| los aplastamientos. |
|
| ||
|
|
|
|
|
|
|
|
Window, Glass Surfaces and Mirrors
Use the dual edge glass and tile squeegee. Work with the vapor jet on using the top to bottom movements. Use the squeegee with the vapor off to clear the water from the glass. To do this without leaving streaks, use lateral movements from the top to the bottom of the surface.
Fiberglass or Stainless Steel Surfaces
Use the floor brush or detail brush. Slowly move the brush over the surface to be cleaned. The vapor will emulsify the dirt and
Garden Furniture
Use any of the brushes depending on the surface area. Work quickly when cleaning resin outdoor furniture.
Blinds
Use the detail brush to clean blinds. Move the brush over the surface, allowing enough time for the vapor to penetrate. Work quickly on PVC blinds. Test for color fastness on fabric blinds before using.
Bathroom Areas
2. Liviano y Portátil
3.Tanque Hervidor de Acero Inoxidable
Tanque hervidor no corrosivo de acero inoxidable fabricado con soldadura.
5.Versátil, cambio rápido de accesorios.
6.Para uso en Interiores y Exteriores:
Baños, cocinas, salas, áreas de mascotas y artefactos. Automóviles, patios y ventanas.
grease on the surface. Follow behind with a terry cloth towel over the brush to remove excess moisture and residue.
Tip: An old idea for polishing stainless steel is to wipe it down with seltzer soda water after it is cleaned.
Soap Scum
Soap scum dissolves almost immediately under a combination of heat and moisture. Rinse the surface with a small amount of water afterwards or go back over it once more with a clean terry cloth towel.
Note: Soap scum sometimes will develop a hard surface from waterborne minerals. If this is the case, use the floor brush with no towel first to break up this surface - or spray or wipe first with lemon, vinegar or seltzer soda water to soften the minerals.
Moving too slowly can dry out the soap scum and cause it to granulate on the surface. The surface will have a gritty feel. If this happens, apply vapor to the surface with the open brush again and
To clean the bathtub or shower area, use the detail brush for grout, shower door tracks, hard to get areas and heavily soiled areas. The dual edge window/tile squeegee will be the most efficient way to clean the rest of the area. Allow plenty of time for the heat to penetrate the surface. This is especially helpful in the shower area if there is tile or grout.
Removal of soap scum on tile, grout, and shower doors is also easier with the Ultra Steam Shark.
To clean sanitary fixtures, use concentrator nozzle with or without detail brush. Use a terry cloth towel or paper towel to wipe up excess moisture and residue.
To clean the sink and faucets, use detail brush.
17 | 10 |