AT&T TL7700 user manual FCC Part 68 and Acta

Page 35

Appendix

FCC Part 68 and ACTA

This equipment complies with Part 68 of the FCC rules and with technical requirements adopted by the Administrative Council for Terminal Attachments (ACTA). The label on the back or bottom of this equipment contains, among other things, a product identifier in the format US: AAAEQ##TXXXX. This identifier must be provided to your telephone service provider upon request.

The plug and jack used to connect this equipment to premises wiring and the telephone network must comply with applicable Part 68 rules and technical requirements adopted by ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. An RJ11 jack should normally be used for connecting to a single line and an RJ14 jack for two lines. See the installation instructions in the user’s manual.

The Ringer Equivalence Number (REN) is used to determine how many devices you may connect to your telephone line and still have them ring when you are called. The REN for this product is encoded as the 6th and 7th characters following the US: in the product identifier (e.g. if ## is 03, the REN is 0.3). In most, but not all areas, the sum of all RENs should be five (5.0) or less. For more information, please contact your telephone service provider.

This equipment may not be used with party lines. If you have specially wired alarm dialing equipment connected to your telephone line, ensure the connection of this equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone service provider or a qualified installer.

If this equipment is malfunctioning, it must be unplugged from the modular jack until the problem has been corrected. Repairs to this telephone equipment can only be made by the manufacturer or its authorized agents. For repair procedures, follow the instructions outlined under the Limited warranty.

If this equipment is causing harm to the telephone network, the telephone service provider may temporarily discontinue your telephone service. The telephone service provider is required to

31

Image 35
Contents User’s manual Congratulations Parts checklist Table of contents Headset lights Quick reference guide headsetVOL+/VOL Headset alert tones Quick reference guide headset charger Avoid placing the telephone base too close to InstallationBattery installation Battery charging and connecting charger power Add and register headsets Register a headset to an AT&T Dect cordless telephone base Replace a headset You may need to deregister your headsets ifTo attach the earbud to the headset earpiece Headset attachmentsEarbud To remove the earbud from the headset earpieceOver-the-ear hook To adjust the headset to wear on the left or right earTo attach the ear hook to the headset To remove the ear hook from the headset Over-the-head band To attach the head band to the headset To remove the head band from the headset Behind-the-neck band To attach the neck band to the headset To remove the neck band from the headset There is no dial tone TroubleshootingMy headset doesn’t work at all Other party cannot hear my voice during a callMy cordless headset isn’t performing normally Battery does not chargeCannot dial out Troubleshooting Troubleshooting Want to use my headset with a different telephone base Hear other calls while using my headsetMy calls cut in and out while I’m using my cordless headset Light on the headset is off while charging Cannot register the headsetCommon cure for electronic equipment Important safety information Important safety information Important safety information Pacemaker patients Precautions for users of implanted cardiac pacemakersAvoid water MaintenanceCleaning your headset Taking care of your headsetFCC Part 68 and Acta Industry Canada FCC Part What does this limited warranty cover? Limited warrantyHow long is the limited warranty period? How do you get warranty service? Other limitations Dect 6.0 digital technology Technical specifications