Eureka 5890 Change Light Bulb, How to Clear a Blockage, English, Eureka Customer Service HELPLINE

Page 7

Change Light Bulb

1)Lower handle to floor (Fig.1).

2)Unscrew the lens and remove old bulb. Replace with bulb rated 12 v., 10 w., Type 904.

3)Push in new bulb, replace lens cover and replace screw (Fig. 2).

Fig. 1

Fig. 2	ENGLISH

1) Remove hose end from duster chamber (Fig. 3). Flex the hose to help loosen any blockage.

1) Unclip sides and clear blockage in opening and hose (Fig. 4).

2) Clip back into place and

reconnect hose at both ends.

Fig. 3

Fig. 4

2)Clear blockage from base hose (Fig. 6). Check for debris in brush roll and clean if needed.

Fig. 5

Fig. 6

Eureka Customer Service HELPLINE 1-800-282-2886

www.eureka.com 5

Image 7

Contents Guía del Propietario OWNER’S GUIDE5890 Series Keep this information Where to Find Important Vacuum InformationBeforeYou Start Your VacuumCleaner Eureka Customer Service HELPLINEREAD ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER ENGLISHMotor IMPORTANT SAFEGUARDS2 Eureka Customer Service HELPLINE How to Identify Parts of Vacuum CleanerMaintenance Schedule Maintenance Schedule is also located on back side of dust cupTelescopic Self-Cleaning Duster on some models How to Use AccessoriesRaise height adjustment to ‘high carpet’ before using accessories Replace hose end into hose retainer after using accessoriesMaintain Brush Roll How to Maintain YourVacuum CleanerMake sure vacuum cleaner is turned off and power cord is unplugged Brush Roll Reset ButtonMake sure vacuum is turned off and power cord is unplugged. Hose How to Clear a BlockageChange Light Bulb Make sure vacuum is turned off and power cord is unpluggedObtaining Warranty Service Outside Your Community This Warranty Does Not Coverthe consumer’s purchase price Warranty Registration Obtaining Warranty ServiceVacuum does not clean Problem SolvingProblem Solution