O |
Attach nozzle
Line up raised rib (O) on front of nozzle with raised rib just above opening on cleaner. Push nozzle securely into cleaner.
P |
R |
Q |
Attach hose and
tool (some models)
Facing the back of the cleaner, position hose connector (P) into holder (Q) on right side of cleaner body making sure latch (R) is inside holder.
S
T
Loop hose over hose hook (S) and posi- tion tool into holder (T) on other side of cleaner body.
2. How to use
Operate cleaner only at voltage speci- fied on data plate located on back of cleaner motor housing.
Polarized plug
To reduce the risk of electric shock, this product has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the
II |
O |
I |
plug does not fit in the outlet, reverse the plug. If it still does not fit, contact a quali- fied electrician to install the proper outlet. Do not change the plug in any way.
Plug cord into electrical outlet. Your cleaner in now ready to operate.
ON-OFF/Speed selector switch
Your cleaner has a one or two speed motor.
Use the one speed model for cleaning any type of rug or bare floor; ON = I,
OFF = 0
Use the two speed model on HIGH (II) for cleaning rugs and carpet, or press the switch to LOW (l) for bare floors; OFF = 0
‘Soft Touch’ hard floor nozzle
The hard floor nozzle has been designed for use on
Rug and floor nozzle
The combination rug and floor nozzle has been designed to do an efficient cleaning job on both carpet and hard surface floors.
Some models come with the standard nozzle. Others come with the deluxe nozzle or with the deluxe wheeled nozzle.
All nozzles have constant edge cleaning for cleaning along baseboards or solid furniture. Both deluxe nozzles have a BARE FLOOR setting and a RUG setting. To change from one setting to the other, refer to the directions below for your deluxe nozzle.
4
A |
Deluxe nozzle
Lock brushes to clean bare floors by slid- ing selector (A) toward BARE FLOOR. Release brushes to clean rugs or carpet by sliding selector toward RUG.
A |
Deluxe wheeled |
nozzle |
Lock brushes to clean bare floors by depressing selector (A) to BARE FLOOR. Release brushes to clean rugs or carpet by depressing selector to RUG.