Hoover Turbo POWER Upright Vacuum Cleaner owner manual Belt replacement, Powered hand tool

Page 10

3-23

B

C

Hold new agitator (B) in one hand, and the belt (C) in the other. Slide the belt onto the agitator, until belt is in the mid- dle of the agitator. Align the belt directly over the grooves on the agitator.

3-24

E

F

Slide end plates (E) of the agitator into the slots (F) on both sides of the agitator cavity.

Turn agitator to make sure it rotates freely.

3-25

Replace bottom plate and screws (7).

Belt replacement

The belt on your Hoover cleaner causes the brush roll to rotate and is important for the effective operation of your cleaner. The brush roll belt is designed to last a long time and does not normally need replacement. The belt is located under the hood of the cleaner and should be checked from time to time to be sure it is in good condition.

3-26

A

Inspecting the belt

Disconnect cleaner from electrical outlet.

The belt can be seen by removing the bottom plate (A). To remove, step on handle release pedal and place cleaner

in the lowest position. Turn cleaner over. Using a Phillips screwdriver, remove the seven screws and lift off the bottom plate.

If the belt is cracked, gouged or broken, it should be replaced.

A new belt can be installed at your near- est Hoover Sales and Service Center.

Powered hand tool

Agitator brush roll replacement

When agitator brushes are worn, the brush roll should be replaced. Ask for

HOOVER part No. 48414088.

3-27

A

How to replace

1.Remove tool from hose and turn it so bottom faces up. Press the latches on either side of tool and remove bottom plate (A).

3-28

B

2.Unscrew the two Phillips screws and remove belt guard (B).

3-29

D

C

3.Remove agitator including end plates

(C) and discard.

4.Inspect belt to ensure that it is in good condition. If belt is cracked, gouged or broken, replace it (see follow- ing section).

5.Insert brush roll through belt and posi- tion belt over gear teeth (D) on brush roll.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents English pp.1-13 Easy assembly seeThis product was designed for Important Safeguards Cleaner Assembly AssemblyPlease do not return this product to the store Switch How to useCleaner description Polarized plugAdjustment Transporting cleanerCarrying cleaner Cleaning lightweight flexible rugsStair cleaning Cleaning toolsExtra reach hose When to empty MaintenanceHow to attach tool cover How to emptyHow to clean filter assembly Filter assemblyCleaning final filter Do not operate cleaner without the fil- ter in placeHow to replace When to replaceAgitator brush roll Agitator brush roll replacement Belt replacementPowered hand tool Inspecting the beltBelt replacement Inspect the belt Replace beltLubrication If you have a problemThermal protector Turn cleaner OFF and unplug ServiceFull Two Year Warranty Domestic Use If a blockage occurs during powered hand tool use

Turbo POWER Upright Vacuum Cleaner specifications

The Hoover Turbo POWER Upright Vacuum Cleaner is a powerful cleaning solution designed to tackle dirt, dust, and debris with ease. Featuring a robust motor and advanced suction technology, this vacuum delivers exceptional performance on various floor types. One of its standout features is the Multi-Cyclonic Filtration System, which separates dirt and debris from the air, ensuring powerful suction that lasts. This technology effectively reduces clogging, helping maintain peak performance even during extensive cleaning tasks.

The Turbo POWER is equipped with a lightweight design, making it easy to maneuver around the home. Weighing in at only 15 pounds, users can lift and transport it without difficulty, getting into those hard-to-reach areas such as stairs and corners. Additionally, the vacuum comes with a large capacity dirt cup, allowing for extended cleaning sessions without frequent interruptions for emptying. This feature proves especially beneficial for larger homes or for those who tackle extensive cleaning projects.

Another notable characteristic of the Hoover Turbo POWER is its advanced brush roll system. The vacuum includes a combination of bristle and rubber wipers that work together to effectively remove embedded dirt from carpets while being gentle enough for hard floor surfaces. This dual-mode functionality allows users to switch between cleaning modes, adapting to the specific needs of their flooring.

Moreover, the vacuum boasts a variety of onboard tools, including a crevice tool, dusting brush, and upholstery nozzle. These attachments provide versatility, enabling users to clean upholstery, tight spaces, and delicate surfaces with ease. Furthermore, the Turbo POWER features a washable HEPA filter that traps 99.97% of dust and allergens, making it an ideal choice for households with allergies or asthma.

With a generous power cord length, users can effortlessly navigate large rooms without constantly changing outlets. The vacuum also features convenient cord storage, allowing for tidy storage when not in use. Finally, the Hoover Turbo POWER Upright Vacuum Cleaner is designed with user-friendly controls, ensuring that anyone can operate it with minimal effort.

In summary, the Hoover Turbo POWER Upright Vacuum Cleaner delivers impressive cleaning capabilities, making it an outstanding choice for any household seeking efficient and effective home cleaning solutions. Its combination of lightweight design, advanced cleaning technologies, and versatile attachments makes it a reliable tool for tackling a variety of cleaning challenges.
Top Page Image Contents