How to use, Switch | Hoover Turbo POWER Upright Vacuum Cleaner

1-6

1-7

Push screws into holes on back of handle (Fig. 1-6) and hose holder (Fig. 1-7).

Tighten screws securely with a Phillips screwdriver.

1-8

Place hose on holder.

2. How to use

Cleaner description

The assembled cleaner will look like the drawing.

2-1

	1
	2
	3
	4		16
	15
		5	21
14			21
14
			20
			17
13	6
13
		7	19
12		7
12
11

1.Handle

2.Custom Control™ power switch

3.Custom Control™ indicator

4.Tool cover

5.Dusting brush

6.Pre-filter

7.HEPA cartridge filter

8.Headlight

9.Furniture guard

10.Nozzle control knob: turn knob to correct setting for height of carpet being cleaned.

11.Final filter

12.Dirt cup

13.Dirt cup handle

14.Powered hand tool

15.Furniture nozzle

16.Hose

17.Carry handle/Hose holder

18.Three position handle

release pedal: step on lever to lower handle to operating or low posi- tions.

19.Cord hooks: wrap cord around hooks for storage. The top hook rotates right or left for easy cord release.

20.Extension wand

21.Crevice wand: stores in wand.

	10
	9	18
	9	8
		8

Operate cleaner only at voltage specified on data plate on bottom of cleaner.

This cleaner is intended for household use.

Polarized plug

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.

2-2

Custom Control™

switch

Plug cord into electrical outlet.

CARPET setting - turns brush roll ON, for cleaning carpets and rugs. (Brush roll will automatically stop turning when handle is raised to upright position.)

BARE FLOOR setting - turns brush roll OFF for cleaning hard surfact floors.

Brush roll automatic shut-off

If something gets caught in the brush roll, the cleaner will automatically turn off.

Slide the Custom Control™ switch to OFF. Unplug the cleaner.

Remove obstruction from brush roll and continue cleaning.