Transporting cleaner
Put handle in upright position. Tilt clean- er back on rear wheels. Push forward.
A
Carrying cleaner
Use the carrying handle to lift the cleaner.
Do not lift cleaner using dirt cup handle (A).
Handle positions
The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating posi- tion for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle.
B |
A |
Carpet height |
adjustment |
The cleaning of carpet and rugs takes place at the nozzle (A).
When it is necessary to raise and lower the nozzle for various carpet pile heights, turn the nozzle control knob (B) to the desired setting.
Settings |
For maximum cleaning performance,
the following carpet height settings are recommended.
Low/Hard Surface: for bare floors and all types of carpet
Note: If the cleaner is difficult to push, turn knob to the next higher setting.
High Pile: for very deep pile carpet where easier pushing effort is desired, while maintaining good cleaning performance.
Cleaning lightweight flexible rugs
Stand on one end of rug and move cleaner toward other end or edge. Before reaching edge, push down on handle. This will lift up the nozzle (front of cleaner) and will prevent rug from clinging to cleaner. Continue to lift up nozzle so that when you have reached the edge, it is completely off the rug. Move cleaner back to start again, lower nozzle, and use only forward strokes.
Continued ➜ | 5 |