Polarized plug
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
B
A
ON-OFF switches
After assembling cleaner, plug cord into electrical outlet. Turn cleaner on by depressing
Note: Pedal opposite
2 - 3
C
On some models two switches are used to turn the cleaner on for opera- tion.
P ress remote control switch (C) on hand grip to the “OFF” position before plugging c o rd into electrical outlet.
Plug cord into an electrical outlet and step on
2 - 4 | 2 - 5 | 2 - 6 |
|
|
|
D
Check bag indicator
The indicator will begin to show red as bag fills with dirt. There are three condi- tions that will cause the indicator to become completely red:
1.The bag is full; change the bag.
2.Ve ry fine materials (such as powder) have been picked up, clogging the bag p o res; change the bag, even if it is not full.
3.There is a blockage in the nozzle, hose, tools, or at the bag opening; remove the b l o c k a g e .
Deluxe power nozzle
Handle positions
The handle has two positions when used with the power nozzle: upright and operating.
To lower handle to operating position, place your foot firmly on the power noz- zle and pull handle back.
Floor surface selector
Carpet or rug cleaning
When using the power nozzle for carpet and rug cleaning, push the floor surface selector button toward “RUG” (D). This setting provides the suction and agitator action necessary to deep clean carpets. The nozzle adjusts automatically to vari- ous carpet pile heights.
5