Hoover Floor Mate Spin Scrub Hard Floor Cleaner manual Cleaning floors, Picking up spills

Page 13

Cleaning floors

 

NOTE:

Your HOOVER® FloorMate™ SpinScrub™ cleaner may be used to clean wood floors that

have been sealed with a polyurethane coating and can be cleaned with water.

CAUTION: To prevent damage to wood floors, follow the flooring manufacturer’s cleaning rec-

ommendations.

 

If using cleaner on sealed wood floors, inspect floor surface for worn finish, bare wood or sepa-

rated joints. Do not use FloorMate™ SpinScrub™ cleaner to wet clean sealed wood floors if any

of these conditions exist.

 

1

Set Mode selector dial to DRY VAC position and vacuum floor.

 

Turn cleaner off and disconnect from electrical outlet. Empty recovery tank (see Figs. 24 &

2

25). Determine the type of brushes to be used (either gray for ceramic and other tiles or white

for vinyl and sealed wood floors). See “Cleaning the brushes” for removing and replacing

3

brushes.

 

Fill solution tank with either Floor to Floor Cleaning Concentrate or Grout Cleaner*, depend-

ing upon the type of floor being cleaned, and water (see Figs. 17 through 23).

 

Do not use solvent based cleaning concentrates in your cleaner. Do not use any type of

4

wax in your cleaner.

 

Turn Mode selector dial to WASH position.

 

Dry hands and plug cleaner into a properly grounded outlet.

 

5

Step on handle release pedal and lower handle to operating position. Turn cleaner ON.

6

To release solution, squeeze trigger (A) (Fig. 31). Slowly

31

7

move cleaner forward and backward over area to be cleaned.

 

Squeeze trigger to release solution as needed.

 

 

Overlap strokes by one inch to help prevent streaking. The

A

 

cleaner’s suction will pick up the dirty solution throughout

8

cleaning.

 

To greatly enhance drying of the floor surface, release trigger

 

and turn Mode selector dial to the WET PICKUP position. Continue to move cleaner over the

9

area to pick up the dirty solution.

 

To continue cleaning another area, turn Mode selector dial to WASH position. Repeat steps 7

through 9.

 

 

Note: When cleaning sealed wood floors, make sure all areas are completely dry. Ensure

 

that no water remains on the floor.

 

 

Note: When switching between wet cleaning and wet pickup, it is not necessary to turn the

10

cleaner off. Simply move the Mode selector dial between the two settings.

Empty recovery tank or clean the filter when the motor sound becomes higher in pitch and

there is a loss of suction (see “Automatic shut-off” section).

 

 

*Available at additional cost if not included with your model.

 

 

Picking up spills

 

Your cleaner may also be used to pick up small liquid spills (1 quart or less, never to exceed 1/4 inch in depth) on non-carpeted floors. Turn Mode selector dial to the WET PICK- UP position and release the trigger. Continue to move cleaner over the area to pick up the spill.

Do not use the cleaner to pick up flammable or combustible liquids or chemicals. do not use the cleaner to pick up detergents that contain solvent based ingredients.

Continued ➜ 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents FloorMate SpinScrub Hard Floor Cleaner Important Safeguards Carton Contents ContentsFeatures Cleaner DescriptionAssemble handle Install brushes and nozzleUnfold handle How to fold handleHandle release pedal ON/OFF switchTransporting General operation Mode selector dialHow to fill Solution upper tankDisconnect cleaner from electrical outlet TanksPage Recovery lower tank To clean filtersHow to empty Recommended cleaning sequence How to cleanWax in your cleaner Cleaning floorsDry hands and plug cleaner into a properly grounded outlet Picking up spillsMaintenance Storing the cleanerCleaning the nozzle Align middle section E of nozzle with opening F on cleaner Cleaner should be in the upright position for easier assemTo replace nozzle, make sure latches D are out Bly of the nozzleRemove tanks to prevent leaking. Set aside Cleaning the brushesWhat’s the problem? What to do TroubleshootingLubrication ServiceDomestic Use Full One Year WarrantyAdvertencia Anote y guarde ContenidoNúmero de modelo Número de serie Características Descripción de la limpiadoraInstale las escobillas y la boquilla Ensamble el mangoDesdoble el mango Cómo doblar el mangoSelector de modo Uso generalLos tanques Tanque para la solución superiorEl tanque de recuperación Apagado automático Uso general continúaCómo vaciarlo Cómo limpiar Limpieza de los filtrosSecuencia recomendada de limpieza Limpieza de pisos Cómo limpiar continúaPara almacenar la limpiadora Limpieza de pisos continúaMantenimiento Para recoger derramesSaque los tanques para evitar fugas. Colóquelos a un lado Limpieza de las escobillasLo que debe hacer Identificación y solución de problemasLubricación ServicioUso doméstico Avertissement Remplir et conserver ContenuModèle n De série Caractéristiques Description de l’aspirateurMontage du manche Installer les brosses et’embout Déployer le mancheUtilisation générale Réservoir à solution supérieurCadran sélecteur Les réservoirsLe réservoir de récupération Arrêt automatique Utilisation générale suiteVidage Nettoyage des filtres Séquence de nettoyage recommandéeNettoyage Nettoyage suite Recommandations du fabricant du plancherNettoyage des planchers Humide des planchers de bois imprégnéRangement de l’aspirateur Nettoyage des planchers suiteEntretien Ramassage de liquides renversésNettoyage des brosses Quel est le problème ? DépannageQue faire ? Usage domestique LubrificationR5 7/07 H3030,H3032,H3040,H3044,H3045,H3030-050 59178-466

Floor Mate Spin Scrub Hard Floor Cleaner specifications

The Hoover FloorMate SpinScrub Hard Floor Cleaner stands out as an essential tool for maintaining the cleanliness and shine of hard floors in homes. With its advanced technology and thoughtful design, this cleaning machine offers powerful performance tailored for a variety of hard surfaces, including tile, hardwood, laminate, and vinyl.

One of the most notable features of the FloorMate is its SpinScrub brush technology. This unique system consists of counter-rotating brushes that work diligently to scrub away dirt and grime from hard floors. The brushes are gentle enough to prevent damage to sensitive surfaces while effectively lifting away stubborn stains and sticky residues. The FloorMate effortlessly adapts to different flooring types, providing a thorough clean without causing scratches or scuff marks.

Another key characteristic of the Hoover FloorMate is its dual-tank system. This innovative design separates clean water from dirty water, ensuring that you’re always using fresh solution for cleaning, and never pushing around dirty water. The clean tank holds the solution and water mixture, while the dirty tank collects the waste water during the cleaning process. This feature not only improves cleaning efficiency but also makes the task of disposing of waste water easy and hygienic.

The FloorMate includes versatile cleaning modes tailored for specific needs. With options for both wet and dry cleaning, users can easily switch between mopping and suctioning up spills. The wet mode is ideal for scrubbing and deep-cleaning, while the dry mode excels at picking up loose debris and fine dust.

Moreover, the Hoover FloorMate is designed with user-friendly features that enhance convenience and efficiency. It typically comes equipped with a lightweight construction and easy maneuverability, allowing users to navigate around furniture and tight corners without hassle. Additionally, the machine often includes features like a handle that folds for compact storage and removable parts for easy washing.

The Hoover FloorMate SpinScrub Hard Floor Cleaner exemplifies effective and efficient hard floor cleaning. Its powerful scrubbing technology, dual-tank system, and versatile cleaning modes make it an invaluable addition to any home. With this machine in your cleaning arsenal, maintaining gleaming floors becomes a simpler and more enjoyable task.
Top Page Image Contents