Electrolux Z2900 Series Models Z2915 Z2920 Z2925, Rountine Maintenance, Washing the Smartbox

Page 7

Rountine Maintenance (continued)

Installing New Dustbag Ref: E82

Fold dustbag flaps of new bag back and slide into unit. Make sure inlet goes into opening on dustbag.

Replace dustbag cover on unit.

NOTE: Dustbag cover cannot be closed unless the dustbag is installed properly.

Pull the Smartbox out of the cleaner.

Models Z2915 Z2920 Z2925

Emptying and Cleaning the Smartbox

NOTE: Switch cleaner off at the mains and remove plug from the electricity supply before emptying or cleaning the Smartbox.

Emptying the Smartbox:

It is important to empty the smartbox regularly. DO NOT allow the Smartbox to become too full.

Remove dustbag/Smartbox cover.

Pull the Smartbox apart and empty the dust and debris into a dustbin. Brush out the smartbox to remove the excess.

Washing the Smartbox:

The Smartbox can be washed in warm water. A small amount of washing up liquid may be added. A brush may be used to remove stubborn dust. Rinse the Smartbox thoroughly and remove the excess water with a dry cloth. Dry the dust container thoroughly (24 hours is preferred) before refitting to the cleaner.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Index UprightImportant Safeguards Before YOU Start GuaranteeSpares How To Assemble Assembly PartsHelpful Information ON/OFF SwitchRemoving the Dustbag E82 How To UseModels Z2901 Z2905 Z2910 Nested extension tubes to add reachModels Z2915 Z2920 Z2925 Rountine MaintenanceInstalling New Dustbag Ref E82 Emptying and Cleaning the Smartbox Emptying the SmartboxBrush Roll Belt Periodic MaintenanceHow To Replace Brush Roll Belt Brush RollTo Clear Blockages in Hose Thermal Cut Off Problem Cause SolutionPage Don’t Forget to Use Genuine Electrolux Bags and Belts 08706
Top Page Image Contents