Periodic Maintenance
NOTE: Turn off the switch and unplug the electrical cord before periodic maintenance. Never operate the vacuum cleaner without the dustbag/Smartbox or filter assembly in place.
Brush Roll
The brush roll turns as it sweeps and combs the carpet pile. Remove hair and threads from the brush roll so it continues brushing the carpet. To maintain the most efficient cleaning, the bristles must touch the carpet.
Brush Roll Belt
The brush roll belt turns the brush roll to agitate, sweep, and comb the carpet pile. Check the belt regularly to be sure it is in good condition. Replace the belt if it stretches, cracks or loses tension. Cut away any hair or threads wound around the brush roll or the belt pulley because the buildup could cause the belt to rotate unevenly.
4.Lift left end of brush roll.
5.Remove and discard belt.
6.Place new belt around motor shaft.
7.Place new belt around brush roll pulley.
How To Replace Brush Roll Belt
1. Lower handle to floor to change belt.
2. Remove the two screws from the top of the hood.
8.Align left end cap with base. Push end cap securely into place.
9.Pull right side of brush roll to stretch belt. Secure right end cap into base.
IMPORTANT
10.Rotate brush roll by hand two full rotations to properly position belt.
11.Place hood back on cleaner. Replace and tighten two screws.
12.Return vacuum to upright position.
3. Lift hood to remove.
8