Electrolux Z2900 Series manual ON/OFF Switch, Helpful Information

Page 5

How To Assemble (continued)

How To Use

7Pull the electrical cord up to the cord retainer and firmly push down into retainer.This will keep the cord out of the way the next time you vacuum.

8Wind the cord around the two cord hooks on the back of the vacuum.

9Secure plug to the cord to prevent unwinding.

WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away from any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the floor type selector.

ON/OFF Switch.

International symbol I means On, International symbol O means Off.

Handle Release. Step on handle release to pull handle back to a comfortable operating position. To lower handle completely to the floor, depress handle release a second time.

10

Store the extension tubes on the side of the vacuum in front of the hose.

Helpful Information:

Before cleaning under low furniture, check area first for objects that might harm the cleaner or block the vacuum hose.

Floor Type Selector. An adjustment that raises or lowers the cleaner base to match the type of floor surface. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum carpet cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.

11Store the dusting brush.

Helpful Information:

Listen to your cleaner. If you notice a change in the sound of the motor or a change in performance, it could simply indicate a common usage or maintenance issue. Such as, a need to raise or lower the carpet height adjustment, possible blockage in hose or brush roll area, or a broken or loose brush roll belt. These are all easy to fix and the instructions are included in this handbook. Becoming familiar with the information in this guide will help you to get the best possible performance from your new cleaner for many years to come.

5

Image 5
Contents Index UprightImportant Safeguards Spares GuaranteeBefore YOU Start How To Assemble Assembly PartsHelpful Information ON/OFF SwitchModels Z2901 Z2905 Z2910 How To UseNested extension tubes to add reach Removing the Dustbag E82Installing New Dustbag Ref E82 Rountine MaintenanceEmptying and Cleaning the Smartbox Emptying the Smartbox Models Z2915 Z2920 Z2925How To Replace Brush Roll Belt Periodic MaintenanceBrush Roll Brush Roll BeltTo Clear Blockages in Hose Thermal Cut Off Problem Cause SolutionPage Don’t Forget to Use Genuine Electrolux Bags and Belts 08706