Eureka 439AZ How to Maintain Your Vacuum Cleaner, Clean Brush Roll, ‘Check Brush Roll’ Light

How to Maintain Your Vacuum Cleaner

!Make sure vacuum cleaner is turned off and power cord is unplugged

Clean Brush Roll

Turn vacuum face down on floor. Use scissors to remove hair and threads from brush roll. (Fig. 1).

‘Check Brush Roll’ Light

! Turn vacuum off and unplug if indicator light turns on. Remove debris that caused the brush roll motor to stall (Fig. 2).

Fig. 1

Fig. 2

How to Clear a Blockage

Hose Blockage

Remove hose end from hose retainer. Flexing the hose will loosen any blockage (Fig 3).

Twist hose connector tab clockwise to remove hose from vacuum body.Clear blockage from hose inlet (Fig. 4).

Blockage in Vacuum Base

Turn vacuum face down on floor.

Squeeze latch to remove cover from clean-out port. (Fig. 5).

Use finger to locate and remove clog from base.

If still clogged, push in lock button and pull floor nozzle off vacuum body.Remove clog from neck of floor nozzle (Fig. 6).

Fig. 3

Fig. 5

Fig. 4

Fig. 6

4 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com