Installing Your Refrigerator

wWARNING

Electric Shock Hazard

Disconnect the power to the refrigerator before performing any installation steps.

Failure to follow this instruction can result in death or electrical shock.

When you are installing your refrigerator, allow 12-inch (1.25cm) of space on each side and at the top of the refrigerator for ease of installation. It can be flush against the back wall. Be sure to wear gloves while installing the refrigerator.

Cleaning your refrigerator

Removing packaging materials

Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.

To remove any remaining tape or label glue:

Rub briskly with thumb.

OR

Apply liquid hand-dishwashing detergent or tooth- paste to area before removing glue as described above. Do not use sharp instruments, rubbing alco- hol, flammable fluids, or abrasive cleaners. These can damage the material. See “Important Safety Instructions” on page 3.

NOTE: Do not remove any permanent instruction labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.

5

Page 5
Image 5
Whirlpool ED20DFXEB00 warranty Installing Your Refrigerator, Cleaning your refrigerator, Removing packaging materials