USING YOUR REFRIGERATOR
Removing the temperature controlled meat drawer and cover
To remove the meat drawer:
1. Slide meat drawer straight out to the stop.
2.Lift the front slightly.
3. Slide out the rest of the way.
4. Replace in reverse order. Make sure boot is over air inlet in side wall.
To remove the cover:
1. Remove meat drawer.
2. Lift front of cover off supports.
3. Lift cover out by pulling up and out.
To replace the cover:
1.Fit back of cover into notch supports on walls of refrigerator.
2.Lower front into place.
3.Replace meat drawer.
Adjusting the meat drawer temperature
Cold air from the freezer flows into the meat drawer. This helps keep the meat drawer colder than the rest of the refrigerator for better storage of meats.
Slide the control from side to side to increase or decrease the temperature in the meat drawer.
14
