Hepa Cartridge Filters Only for models, Motor Filter

Eureka 4380, 4480 warranty Hepa Cartridge Filters Only for models, To remove Hepa cartridge filters

Page 15

HEPA Cartridge Filters (Only for models

with HEPA cartridge .)

Check the HEPA filters with each disposable dust bag change. Replace twice a year or after every six bag changes.

Latch

Filter Cartridge (One complete unit)

Tabs

To remove HEPA cartridge filters

1.Push down latch and pull filter cassette back.

2.Then lift filter up and remove.

To replace HEPA cartridge filters

1.Place bottom tabs of filter cassette into slots.

2.Rotate filter toward cleaner.

3.Push upward on the latch to secure into place.

NOTE: To have the benefit of a sealed HEPA system, you must use one of the HEPA cartridge filter systems.

Filters in Filter Frame

(Only for models with filter frame)

Check the filter each time dust cup is emptied or as needed. Replace twice a year as needed.

Filter Frame plus
filter (depending
on your vacuum
model)
Filter	Filter
	Frame

To remove filters from filter frame.

1.Push down latch and pull filter frame back.

2.Then lift filter up and out of filter frame.

To replace filters into filter frame.

1.Place new filter in filter frame. Place bottom tabs of filter frame into slots.

2.Rotate filter frame toward cleaner.

3.Push upward on the latch to secure into place.

Motor Filter

Check the motor filter with each disposable dust bag change. Clean or replace as needed.

To Clean Motor Filter

1.Remove filter from inside bag compartment, lower left side.

2.Shake filter to remove excess dust. If necessary, the filter can be cleaned by vacuuming with another cleaner.

3.Reinstall filter with stiff/printed side down. Slide under back ledge and filter retainer. Install with colored/smooth side down.

Back Ledge 3

Filter Retainer 3

1 and 3

Image 15

Contents

Index Do not return this Product to the storeHousehold Type Important Safeguards Conseils DE Sécurité Rating Plate Service InformationGeneral Information USA Mexico CanadaHOW to Assemble Step a Attach HoseStep B Attach Handle Cord Hook Carrying Handle Crevice Tool Step C Store Hose and AccessoriesStep D Store Electrical Cord Step E Check Cyclonic CassetteThermal CUT OFF HOW to USECleaner Height Setting Handle Release Clean UnderHow To Use Accessories Nested Extension Wands to add reachDusting Side Upholstery Stair Cleaning Hose Only on Certain Models HOW to Assemble and USEMaintenance of Dirt Alert Feature On some models How to Check the Dirt Alert SensorsTo check if dirt sensor is working properly HOW to Maintain To Change Cassette Micron Filter To Change the Cassette Micron Filter Emptying the Cyclonic Cassette HOW to Maintain How To Empty Cyclonic CassetteMotor Pulley Belt Brush Roll HOW to Maintain Brush RollHow To Replace Brush Roll Belt Brush Roll BeltHose Assembly Attached Wand HOW to Maintain How to Clear Hose ClogsTo replace Hepa cartridge filters To Clean Motor FilterHepa Cartridge Filters Only for models To remove Hepa cartridge filtersHOW to Maintain How To Change Light Bulb Only for models Micron and Hepa Exhaust Filters OnlyTo Replace Micron or Hepa Exhaust Filter Problem Solving Cause Solution USA Mexico Canada Eureka Limited WarrantyBrush Rolls Accessories/ToolsGenuine Eureka Bags, Belts and Filters HosesQuestions? Do Not Return To Store Call

Eureka 4380, 4480 warranty Hepa Cartridge Filters Only for models, To remove Hepa cartridge filters