HOW to Maintain How to Clear Hose Clogs

Eureka 4480, 4380 warranty HOW to Maintain How to Clear Hose Clogs, Hose Assembly Attached Wand

Page 14

HOW TO MAINTAIN (continued)

Note: Turn off the switch and unplug the electrical cord before clearing hose.

1.Step on handle release.

2.Lower handle until cleaner is flat on the floor.

3.Turn the cleaner over so back side faces up.

4.Lift cleaner and rest it against a support or counter.

5.Pull upward on the attached wand portion of the hose assembly and remove from the hose retainer.

6.Check for clogs in the hose retainer and throughout the hose assembly.

7.Use a tool that will not puncture the hose. Clear any debris from the hose retainer or the hose assembly that could restrict the air movement.

Hose

Retainer

8.Flexing the hose may help loosen the clog.

9.After the clog is removed make sure the hose assembly, and handle are reassembled onto the unit.

10.If the clog is hard to remove, check the brush roll area. Remove the hood and clear the hose inlet in the brush roll area.

Image 14

Contents

Household Type IndexDo not return this Product to the store Important Safeguards Conseils DE Sécurité USA Mexico Canada Service InformationGeneral Information Rating PlateStep B Attach Handle HOW to AssembleStep a Attach Hose Step E Check Cyclonic Cassette Step C Store Hose and AccessoriesStep D Store Electrical Cord Cord Hook Carrying Handle Crevice ToolHandle Release Clean Under HOW to USECleaner Height Setting Thermal CUT OFFDusting Side Upholstery How To Use AccessoriesNested Extension Wands to add reach HOW to Assemble and USE Stair Cleaning Hose Only on Certain Models To check if dirt sensor is working properly Maintenance of Dirt Alert Feature On some models How to Check the Dirt Alert Sensors To Change the Cassette Micron Filter HOW to MaintainTo Change Cassette Micron Filter HOW to Maintain How To Empty Cyclonic Cassette Emptying the Cyclonic CassetteBrush Roll Belt HOW to Maintain Brush RollHow To Replace Brush Roll Belt Motor Pulley Belt Brush RollHOW to Maintain How to Clear Hose Clogs Hose Assembly Attached WandTo remove Hepa cartridge filters To Clean Motor FilterHepa Cartridge Filters Only for models To replace Hepa cartridge filtersTo Replace Micron or Hepa Exhaust Filter HOW to Maintain How To Change Light Bulb Only for modelsMicron and Hepa Exhaust Filters Only Problem Solving Cause Solution Eureka Limited Warranty USA Mexico CanadaHoses Accessories/ToolsGenuine Eureka Bags, Belts and Filters Brush RollsQuestions? Do Not Return To Store Call