![](/images/new-backgrounds/1040571/4057121x1.webp)
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the cyclonic cassette, belt, and brush roll often.
To Change Cassette Micron Filter:
NOTE: Turn off the switch and unplug the electrical cord before changing the Cassette Micron Filter. Never operate the vacuum cleaner without the cyclonic cassette or the filter.
2
Remove cyclonic cassette by pushing up lever (1), unhooking
(2)by swinging outward from vacuum body. When replacing cyclonic cassette, hook at top where shown (2), and swing back into place until lever (1) snaps into place.
1
Check and clean the Cassette Micron Filter once a month to maintain good performance. The filter can be cleaned by vacuuming with another cleaner or brushing dust off into the trash. Recommended changing of the Cassette Micron Filter is once every three months.
To Change the Cassette Micron Filter:
1.Remove the filter frame by grasping the handle on the back of the filter frame and pulling firmly. The filter frame will drop down staying connected at the hinges on the bottom.
2.Remove old filter from filter frame and replace with a new filter.
3.Reconnect filter frame to cassette body by swinging filter frame up and pushing against cassette body until it snaps into place.
3
2
1. Filter Frame
2. Filter | 1 |
3. Cassette Body
Use GENUINE EUREKA replacement filter, 28115A. Look for the GENUINE EUREKA product symbol.
11