GE JP388, JP385, JP386 How to Set The Gtiddle Controls, Griddle Tips, Automatic Blower Operation

Models: JP388 JP383 JP384 JP387 JP386 JP385

1 44
Download 44 pages 53 Kb
Page 23
Image 23
How to Set The Gtiddle Controls

How to Set The Gtiddle Controls

me control hob must be pushed in to turn; this prevents the heating element from being turned on awidentily. Push the knob in ody when it is in the OFF position. men the knob is in any other position, it m be turned without pushing it in.

Front and rear sections of the griddle heating element are controlled separately. Heat ody hdf the gndde surfa~ for cooking small portions or set each hdf at a different temperature for rooking different types of foods.

Push in the control knob depending on which side of the cooktop gridde module is used. me right front and right rear control knobs mntrol the gridde when the module is on the right side (on some models). The left front and left rear control knobs operate the gridde when the gridde module is on the left side of the cooktop.

Automatic Blower Operation

The blower comes on automatidly when the @dde is turned on and turns off automatidly when the gridde is turned off.

Griddle Tips

Most gridded foods require cooking on a preheated surface, which may be greased lighdy before adding food. Preheat gridde 5 minutes or less at HI setting, then switch to recommended mok setting.

If your house has low voltage, foods may be

lighter brown than expected. A longer preheating and gridde time maybe needed to get good rooking restits.

Make sure the gridde is clean.

Check the grease wllector jar and empty if necessary to avoid spillovers.

To avoid damaging the nonstick finish, store the gridde upright on edge, if possible. If it is neussary to store it flat, avoid placing other pans or utensfls on top.

Foods which are high in natural fat, such as bacon or sausage, maybe started on a mld gridde.

The blower mmes on autornatidly when the gridde is turned on and turns off automatically when the gridde is turned off.

Avoid using metal utensils with sharp points or rough or sharp edges which might damage the nonstick coated gridde surface. Do not cut foods on the @dde.

Foods to be warmed may be placed directiy on the gridde; a high domed metal cover, such as an inverted ketie, placed over them wdl help store the heat.

Condition or “season” the gndde before fimt-time use.

(contiued n~tpage)

23

Page 23
Image 23
GE JP388, JP385, JP386, JP387, JP384, JP383 How to Set The Gtiddle Controls, Griddle Tips, Automatic Blower Operation