. .
Mdiant Modul~lass Cemmic Cootiop Cleaning
Cleaning of #ass ceramic cooktops is different from cleaning a standard porcelain finish. To maintain and protect the surface of your new glass ceramic cooktop follow these basic steps.
Before using your module for the first time, clean
it with Cook Top ~eaning Creme. This helps protect the top and makes
DMLY CL~NG: Use only Cook Top Cleaning Creme on Glass Ceramic.
For normal, tight soil:
1.Rub a few drops ~ess is better) of Cook Top ~erming Creme onto the soded area using a damp paper towel. Wipe unti all soil and creme are removed Frequent cleaning leaves a protective coating which is essential in preventing scratches and abrasions.
2.Clean the surface with Cook Top Cleaning Creme after each use.
For heavy, burned on soil:
1.Apply a few drops of Cook Top Cleaning Creme to the (cool) soiled area.
2.Using a damp paper towel, rub creme into the burned on area. As with any burned on spdl, this may require some effort.
3.Caretily scrape remaining soil with the razor scraper. Hold the scraper at a 30° an~e against the
4.If any soti remains, repeat the steps listed above. For additiond protectio~ after dl soil has been removed polish the entire surface with the Cook Top Cleaning Creme.
5.Buff with a dry paper towel.
NO~:
●Using a razor scraper will not damage the surface if the 30° angle is maintained.
●Be sure to use a new, sharp razor scraper.
Do not use a dull or nicked blade.
●Store the mor scraper out of reach of children.
Special Care:
Sugary spillovers (such as jellies, fudge, ~dy syrups) or melted plastics can cause pitting of the surface of your moktop (not covered by the warranty) urdess the spill is removed while still hot. Special care should be tiken when removing hot substances. Follow these instructions carefully and remove the soil while the spill is still hot.
1.Turn off all the surface units affected by the spillover. Remove hot pans.
2.Wearing an oven mitt, hold the razor scraper at a 30° angle to the cooktop and scrape the hot spill to a cool area outside the surface unit.
3.With the spfil in a cool ar~ use a dry paper towel to remove any exwss. Any spfilover re rnaining shotid be left unti the surfam of the modde has cooled.
Do not mntinue to use the sofied surface unit unti dl of the spfiover has been removed. FOUOW the steps under Heavy Sod to continue the cleaning process.
General Information:
As the Cook Top Cleaning Creme cleans, it leaves a protective coating on the moktop surface.
This coating helps to prevent
susceptible to staining.
To conveniently order more creme and/or scrapers for cleaning your radiant range, please call our toll free number:
National Parts Center | |
Creme 10 oz. | # WB02X8273 |
Scraper | # WX1614 |
Creme and scraper kit | # WB64M027 |
●Most cleaners contain ammonia, chemicals and abrasives which can damage the surface of your cooktop. Use only the Cook Top Cleaning Creme for proper cleaning and protection of your glass ceramic surface.
●If you slide aluminum or copper coo~are across the surface of your cooktop, they may leave metal markings which appear as scratches. If this shotid happen, use the razor scraper and Cleaning Creme to remove these markings. Failure to remove these residues immediately may leave permanent marks.
32
●Water stains (mineral deposits) are removable using Cook Top Cleaning Creme or full stren~ white vinegar.
●H pots with a thin overlay of rduminum, mpper, or enamel are allowed to bofl dry, the overlay may bond with the ~ass mrarnic and leave a black discoloration. This shodd be removed immediately before heating again or the discoloration maybe permanent.
●Use of window cleaner may leave an iridescent film — on the cooktop. Cook Top Cleaning Creme will
remove this discoloration.
Read and follow all instructions and warnings on Cook Top Cleaning Creme labels.
