GE JP386, JP385, JP387, JP384, JP383, JP388 installation instructions Solid Disk Module, contiued mpage

—

Solid Disk Module

Clean the area surrounding the solid disk surface units according to either the Brushed Chrome or Porcelain sections (depending on your model).

DO NOT USE steel wool or abrasives on the brushed chrome parts of the module.

The sotid disk surface units are made of high strength cast-iron a~oy.

The surface has a heat-resistant coating to preserve the surface of the uniL After the unit cools, any boded-over material on the solid disk surface units should be removed as soon as possible with a slightiy damp cloth. The unit shotid then be dried by switching on for a few minutes. After it cools, wipe lightiy with cooking oil.

Clean very dirty solid disk surface units with a litie cleaning powder (such as ~met” cleanser) or with a scouring pad.

—

The matte black surface can be maintained by treating it periodically with Cello Electrol” polish which is available from your GE supplier. Use the applicator to apply a very thin coating of the polish to the entire stiace unit surface. Turn the unit on high for several minutes to bake the polish to the unit. men the unit is coole~ rub lightiy with a cloth or paper towel to remove any excess polish. Before next use, bum off the unit by means of a short preheating period. A slight amount of smoke and odor will occur.

Failure to maintain the solid disk surface units as directed will result in defacing the surface over a period of time primarily due to mrrosio~ as the surface units are made of cast-iron construction.

Do not use covers over the solid disk surface units. A surface unit turned on while the cover is in plain can permanently damage the cooktop. avers can dso trap moisture which may cause the solid disk surface units to rust.

(contiued mpage)

31

I