GE JP383, JP385, JP386, JP387, JP384 G~DLEACCESSORy, Remoting the Gtiddle Module, Using the Gtidde

G~DLEACCESSORy

—

You must have the gri~ module to use the grid&e accessory.

Your non-stick coated gridde provides an extra-large cooking surface for meats, pancakes, or other food usurdly prepared in a frying pan or eleetric stilet.

W~ING: Do not use gridde moddes ~D43 or	/
~D% with these cooktops.

How to Inseti the Gtiddle AccessoW and the Gfill Module

R*

+>

m

1.Make sure the grease colle~or jar is in place beneath the cooktop.

2.Fit the reflector pan in the cooktop.

-The slots in the pan permit grease to drain into the jar. Keep the slots open at all times.

3., Make sure dl wntrols are turned to OFF. Hold the heating element with the plug facing the side of the cooktop and level with the surface. Insert the plug into the eooktop outlet as far as it wtil go. @o not force.) The heating element suppofi should rest on the ledge of the reflector pan.

4. Place the gridde plate	—
on the reflector pan
over the heating
element. The plate
shotid be seated
properly on the reflector
pan with the gridde’s
drain holes at the front.

Remoting the Gtiddle Module

men removing the parts of the grill module to clean, be sure dl switches are in the OFF position ad the module is cool. Remove the gridde plate and then slide the heating element toward the center of the cooktop untfl it is unplugged. Remove the reflector pan. Empty grease mllector jar when mol. Be sure to replam the jar.

Using the Gtidde

The non-stick gridde must be preconditioned before using it for the first time. To preconditio~ first wash the gridde in soap and water and dry. Then use a paper towel to apply a sAI amount of cooking oil to the gridde. Remove excess oil with a clean paper towel.

Preheat the gridde as recommended in the Gndde Cooking Guide. Mer preheating for the re~mrnended amount of time, apply a small amount of oil or butter.

Do not overheat the griddle. having the gridde at HI for more than 5 minutes without food a damage the non-stick coating.

Because the heating element under the gridde is

divide~ you m vary the temperature of the front — and rear sections.

22