Coil Sutiace Unit Module
Clean the area sumunding the surface uniti according to either the Brushed Chrome or Porcelain section (depending on your model).
To clean the surface uniti, turn the control to the highest setting for a minute. The coils will bum off any soil.
CA~ON
●Be sure d] controls are turned to OFF and surface units are cool before attempting to remove them.
●Do not immerse the surface units or the module in liquids of any kind.
●Do not clean the surface units or the module in a dishwasher.
●Do not bend the surface unit plug terrninds.
●Do not attempt to clean, adjust or in any way repair the
Sudace Unit
Dtip Pan
To remove a surface unit:
To remove the drip pans for cleaning, the surface units must be removed first.
Lift the surface unit about 1 inch above the drip pan and ptil it out.
Do not tift the surface unit more than 1 inch. If you do, it may not lie flat on the drip pan when you plug it back in.
Repeated ~ng of the surface unit more than 1 inch above the drip pan can permanently damage the receptacle.
To replace a surface unit:
●Replace the drip pan into the recess in the eooktop. Make sure the opening in the pan lines up with the receptacle.
●Insert the terminrds of the surface unit through the opening in the drip pan and into the receptacle.
●Guide the surface unit into place so it rests everdy.
Drip Pans
Remove the surface units. Then lift out the drip pans. -
For best results, clean the drip pans by hand. Plaa them in a covered container (or a plastic bag) with 1/4 cup ammonia to loosen the soil. Then scrub with a soap filled scouring pad if necessary. Rinse with clean water and polish with a clean soft cloth.
The drip pans may dso be cleaned in the dishwasher.
Do not cover the drip pans with foil.
Using foil so close to the receptacle could cause shock fire or damage to the cooktop.
Clean the area under the drip pans often.
—
30
