GE JP383, JP385, JP386, JP387, JP384, JP388 ~ Cl~G, Vent System, Modules, 4A- Ill

C-~ CL~G

(continued) —

Wipe out tub with hot soapy water-r a soap filled or plastic smting pad. Rinse with a damp cloth. Make sure the drain hole is not blocked. Clean with a cotton swab or toothpick.

Vent System

Before cleaning the vent grille, be sure exhaust blower is shut off.

To clean the vent grille, remove it from the coo~op by lifting it up. Wipe with a damp cloth.

If necessary the vent ~le can be washed in the sink. Use dishwashing liquid for cleaning.

Do not use abrasive cleaners. ~ey will damage the vent ~le’s finish.

Do not clean the vent grille in the dishwasher.

To clean the vent chamber, use hot soapy water. Do not use abrasive cleaners. They will damage the finish.

Vent Filter

me filter is held in place with a metal latch. Move latch up in either direction and lift filter up and out of the vent opening.

Clean the ffiter by swishing it in hot, soapy water. Rinse well and dry thorou~y.

Do not operate the vent without the filter in place. >A

		4	Vent FiRer
,r	?4		—

Vent Chamber

m.4A- Ill

Modules

CA~ON

●Be sure rdl controls are turned 0~ before attempting to remove a modtie or heating element.

●Do not attempt to clean plug-in surfam units or ml heating element in an automatic dishwasher.

●Do not immerse plug-in surface units in liquids of any kind

●Do not bend the plug-in sudace unit plug terminals.

●Do not attempt to clean, adjust or in any way repair the plug-in receptacle.

.—

28