GE JP383, JP385 COm S~ACE ~ MOD~E, How to hseti the Module, How to Remove the Module, Coo&am

COm S~ACE ~ MOD~E

How to hseti the Module

1.Be sure the controls are turned to OFF. To install the module, position the plug to the outside wdl of the cooktop.

2.Slide the module toward the outiet in the side of the cooktop until the plug is pushed dl the way h.

3.hwer the inside edge of the module into the cooktop untd it is flush with the cooking surface.

How to Remove the Module

1.Be sure the controls are turned to OFF and the surface units are cool before attempting to remove the module.

2.Lift up the tab at the inside edge of the modde until the base clears the opening at the side of the cooktop.

3.To unplug, hold the modtie by the front and back edges and slide toward the center of the cooktop. Lift out when unplugged.

4.If you are storing modties, do not stack them or store other matends on top of them. This could damage the surface of the moddes.

Coo&am

RightWrong

Use medium- or heavy-weight mohare. Auminum cookware conducts heat faster than other metals. Cast-iron and mated cast-iron cookware are slow to absorb heat but generally cook evedy at low to medium heat settings. Steel pans may cook unevedy if not combined with other metis.

For best rooking restits pw shotid be flat on the	Not over 1 inch	Over 1 inch
bottom. Match the stie of the saucepan to the she of
the surfa~ unit. The pan should not esend over the
edge of the surface unit more than 1 inch.

Nways read and follow cookware manufacturer’s instructions on mokware use.

—

10