Philips 9P6440C1, 9P6040C1, 9P5540C1, 9P5040C1 manual HOW to USE the PICTURE-IN-PICTURE PIP Feature

HOW TO USE THE PICTURE-IN-PICTURE (PIP) FEATURE

icture-in-Picture (PIP) is the

Pshowing of two pictures on the

TV screen at the same time. (One

main screen picture and one small

inset picture - or PIP). For your

ease and convenience this TV has

two separate inputs (ANTenna A

and ANTenna B) for your home’s

Antenna and/or Cable TV system

signal.

The ANT A input is primarily for

the TV’s main screen picture.

The ANT B input is provided as a

second, dedicated source option

for the TV’s PIP “window” and

its feature operations. The signal

connected to the ANT B input can

be either a Split Signal Input (as

described in the section on this

page), or another type of external

signal source (such as a satellite

dish system, additional home

antenna, video accessory, etc.).

See the following steps on how

channels connected to the

ANT(enna) B Input can be shown

- MAIN SCREEN -

Display signal supplied primarily through ANT A Input on rear of TV.

Combination VHF/UHF Antenna

300 to 75Ω Adapter

(483521827003)

Twin Lead

Wire

OR

- Outdoor or Indoor Antenna -

receives normal broadcast channels

2-13 (VHF) and 14-69 (UHF). Round Cable

75Ω Ohm

- PIP WINDOW -

Display signal supplied primarily through ANT B Input on rear of TV.

BACK OF TV

and used within the PIP window:

BEGIN

1 Connect your Antenna or

Cable TV signal to the single 75

ohm INPUT plug on a two-way

Signal Splitter (not supplied).

Connect two lengths of RF

Coaxial Cable (F-type connectors

on both ends) to the two OUTPUT

plugs on the two-way Signal

Splitter.

2 Connect the twin OUTPUT

plugs on the Signal Splitter to the

ANT A and ANT B Inputs on the

rear of the TV.

continue to next page

SMART HELP

For other possible PIP connections see page 53 for

the "More PIP Connections" section.

If you need any accessories or parts to complete the described PIP connections, contact your dealer, or our Parts Information Center at (1-800-851-8885) for details.

	1	ANT(enna) A	FIXED	VIDEO OUT	2	VIDEO
			VAR			L
		Input	PIP			R
						AUDIO
			R	L		AUX 1 AUX 2
			AUDIO OUT			INPUTS
OR				ANT A/CABLE		PIP
				75 V UHF/VHF		ANT B/CABLE
						75 V UHF/VHF
	OPTIONAL TWO-WAY					ANT(enna) B
	SIGNAL SPLITTER					Input
	(single 75ohm Input to twin 75 ohm Outputs -		Note: The purpose of the ANT B input is to
	optional RF Coaxial connecting cables also
			provide an easily connected, dedicated picture
	required)
			source for PIP feature use. Other signal source
			options (such as a satellite dish system, additional
			external antenna, VCR, or Video Game) could also
			be connected and displayed on the TV’s PIP screen
			window through the use of the ANT B input.
Cable TV Signal
	OUT	IN
Round Cable		Cable TV
75Ω Ohm

Company

See the Set-Up Guide also provided with your TV set for further Cable TV connection options and accessories.

48

48